Polyurethane over stain... question
I am afraid of getting that haze/cloud again since I don't want to add another coat.
What causes the haze? Did I do something wrong? If you do recommend I sand the final coat, what can I do to remove the haze if the tack cloth doesn't work?
Thanks !
-
Lisa @ {createinspire} on Jul 08, 2013The white "haze" you saw could have been moisture in the wood which would leave a cloudy spot, but I'm guessing since you don't see it after the second coat of poly that the "haze" you saw was because of the light sanding you gave it with the 600 grit (which is why it went away when you gave it another coat). You do not want to sand your final coat of poly (sanding it dulls the surface which is why it looks "white"). Hope this helps. :)Helpful Reply
-
-
Executive Handyman and Home Repair Services on Jul 10, 2013KrysFL - I'm guessing the desk was originally finished w/ lacquer or varnish. Lacquer doesn't like water and will haze where exposed to it. Sanding was good move. The finer grit the better. I recommend sanding again [go easy, use a sanding block where possible] to remove the brush marks, clean with mineral spirits [cotton cloth], let dry. and then put another 2 coats of Minwax Wipe-On poly. You apply it with a soft cotton cloth. Try to single stroke moves. Not circular. Wipe with grain of wood. Short of spraying, this will give you the best final finish. I recommend Satin over Semi-Gloss or Gloss. Do not use any type of sandpaper after that. Good luck.Helpful Reply
-
-
KrysFL on Jul 10, 2013Thanks, I am using satin and this was bare wood with dark walnut stain over it (that I stained/built from scratch). I am definitely going to try wiping on the final coat instead of brushing. Thank you! BTW, Parrish isn't too far away Sure you don't wanna come do it for me? lolHelpful Reply
-
-
Executive Handyman and Home Repair Services on Jul 11, 2013The Wipe-On poly is a thinner coat than applying brush [you'll see]. It's less viscous. 2 coats minimum - 4 will make you smile! 4 ought steel wool, circular motion, in between coats [just to knock off little flecks] but not on the final coat. I am a bit confused when you say it was bare wood with stain. If it was bare, that precludes any old lacquer or varnish on it. If there was still a haze than it was not in the lacquer like I thought. Is the haze still present?Helpful Reply
-
-
KrysFL on Jul 12, 2013Nope. I ended up doing a 600 grit sandpaper, cleaning with tack cloth. Then did what you said, wiped on the poly and it looked great! The finish was really smooth after that so I just stopped there (didn't want to add another coat then not like it). Thanks again!Helpful Reply
-
-
Executive Handyman and Home Repair Services on Jul 14, 2013You're welcome. Glad I could help.Helpful Reply
-
Related Discussions
What are your thoughts on painted brick: yay or nay?
Painting bricks can completely transform the appearance of a home, giving it a fresh, modern look or adding a pop of color to an otherwise plain facade.On the other h... See more
Where can i find natural flat stones for free to lay a pathway
How do I get rid of these bugs? They have invaded the outside of house
This is the best picture I have at the moment. It has orange markings on the top of the body. The outside of my house is covered with them. Can you please tell me wha... See more
How to get rid of bug infestation in my dry pasta packages
Very small black or dark bugs in pantry, unopened cellophane wrapped or paper packages. Can you identify and advice?
Curb side find! What would you do?
I found this in the curb this morning on my way to work. Needless to say I'm late :) does anyone know anything about this piece? What would you do with it? Paint? Res... See more
Help please! What color for the front door?
We're remodeling this 1930's house. We have a new red metal roof & plan to keep the white siding. What would you suggest as a front door color? I love bright, bold co... See more
How to get rid of tomatillos bugs?
Sow tomatillos this year, and couple days i notice it they are been bitten i look around and i found some disgusting creatures, I've healthy plants besides these inci... See more