My hot glue guns aren't working, what am I doing wrong?
Related Discussions
Blackout curtains behind vertical blinds
I have two 6' patio doors, and I want to add blackout curtains to keep the sun/cold out. What is the best way to hang them, and what can I use to push the curtains ba... See more
How to make a balloon garland?
Does anyone know how to make a balloon garland or a balloon arch?
Does anyone know what this is?
Just turn them upside down and open them, then insert a roll of paper towel and tada, you have yourself a brand new paper towel holder that is not only beautiful, but... See more
Can anyone identify this vintage wooden crank box?
The item is solid wood, standing aprx. 26" high x 16" wide, no exterior holes or outlets, side crank handle turns four wooden paddles inside with various size holes o... See more
What to put in this huge mason jar?
I have a HUGE mason jar. I would like some ideas on what to put in it for decorations, other than flowers.
How can I find discontinued Pulaski or Neiman Marcus/Horchow furniture
I am looking for the discontinued Pulaski Royale collection nightstand, Neiman Marcus/Horchow also sold it, but called it the Royalty collection. I have looked all ov... See more
Ideas on different things I can do with these yummy old spools?
I'm a picker and came across lots and lots of these beauties. I took home several boxes of these purdies and are using for different projects. However, I want to find... See more
Are you sure the stick is all the way down inside. When you start a new stick with mine I have to push it in there til it grabs it and pulls it in to melt it.
Yea, and sometimes I have to use another stick to shove it far enough for it to grab.
Unless I am using the long glue sticks, I need to stack a second glue stick so the first gets pushed into the hot tip. It can take a slow push to get the glue stick into the hot tip. If the tip is hot, you just have to push the glue stick in harder. If the tip is not getting hot enough to melt the glue if you touch it to a glue stick, the heating mechanism is not working.
Are you sure your electrical outlet is working? Plug in a lamp or hair dryer to check it. Waiting for the gun to fully heat and pushing the glue stick with your hand is vital, as already mentioned. Also be sure you're using the proper type of glue stick for your glue gun.
It might be your outlet, plug something you know works on another outlet and then try it in your glue gun outlet. If it works, it is your glue gun, if not working, it is your outlet.
I have a similar problem. Got on okay with one cheap gun then it stopped dispensing the glue. So had to push in another glue stick with right hand. Making it impossible to guide the gun to the work. Then it all got clogged inside, and I had to dig it all out. Pull the half melted glue stick out of the end, not easy.
Gun no good now. So bought a Stanley a good make, 1st time I used it same issue. No glue coming out. The trigger mechanism is rather strange as it doesn't actually push the glue stick in at all, it just glides round it.
you have to push the glue stick through by hand most of the time.
I faced the same problem when i got my first glue gun. After loads of research and advice from friends, I realized that you will actually need to replace your glue stick with a longer one if you can detect no other problem. consult your manufacturer too for more information.
the gun is hot, I get it primed. As I work with it the hot glue backs up into the area where the trigger brings the stick forward and the blocks it from moving further......what am I doing wrong?
I have a stanley professional and the blue and orange one like the videos. Same problem. It gets hot. I remember when it used to work it would curl up a Big Blob of glue where the tip is when I wasn't using it so I had to sit something under it especially when I was hitting it. It seems to be a mess at the open viewing part where the rubber thing goes around the stick it is frustrating .I feel you
Do not lay the gun on its side it will NOT heat up right n the will NOT come out. Always keep it straight or down word n it should come out that way. I had the same problem. Hope this works for you.