How do you successfully paint laminated cabinet doors?
Related Discussions
Should I paint or stain my oak kitchen cabinets?
I was wondering if you could help me with something -- I have an entirely oak kitchen. I know it's the rage now to paint or gel stain cabinets. I've been considering ... See more
How to paint a metal front door?
How do I paint my front door? It's metal.
How to paint grout?
How do I paint grout to change the color? The grout is in great shape, but the color - meh.
How to whitewash a brick fireplace?
What is the best method to whitewash bricks surrounding a fireplace?
How do you keep painted cabinet doors from sticking?
Can you paint 70’s style wood grain laminate cabinets?
These cabinets have good boxes or frames they are just ugly. The doors are plain with no molding.
Remove the doors and hardware.Lightly sand,clean,prime with two coats allowing to dry in-between using a foam brush,Paint and seal with a polycrylic.
Remove the doors and hardware. Mark the doors and cabinets with tape where they go. Lightly sand the doors and cabinets to remove any gloss and roughen the surface for paint. Prime with a stain blocking primer like Zinsser 123. Then paint with your color. Seal with at least three coats with a water based polyurethane. Use a small foam roller and foam brush for a smooth finish.
You can use Chalk Paint directly on laminate without priming. But it will need to be sealed with either clear wax or a top coat. I like General Finishes High Performance Top Coat.
Thank you, I will look into that
First you need to tell me if the doors are latex or oil based.
We used melamine paint. They don't need to be sealed afterwards. Make sure they are cleaned well first and sand out any rough spots it takes two coats We did ours two years ago and they are holding up well. This paint can be tinted to whatever colour you like . We just painted and changed the hardware. Here is a before and after picture
I used General Finishes Java Gel to give my maple cabinets a rich hand rubbed finish. I used a regular kitchen scrubby, mineral sprits and where grease was an issue, I made sure to clean that well. (If you don't the gel will find it , bead up and you have to remove it with a dry cloth.) I applied the gel with a sponge brush and rubbed it with a cloth to achieve the color I wanted. Sealed with 3 top coats of water based polyurethane. BIG hint....let the doors dry standing up or dust particles settle and make the finish seedy feeling. The gel is very forgiving . I used the same Java in the bathrooms too, but just applied it directly for an almost black finish. Be patient and do one coat at a time. 2-3 coats plus 3 coats of clear.
I've had great success with Rustoleum's Cabinet Transformations and Furniture Transformations kits. No stripping or sanding required and very little prep work (wipe on prep is included in the kit). And it doesn't require a lot of ventilation. There are many colors available, in both light and dark colors. Check out the info here: http://www.rustoleum.com/product-catalog/cons...>
I have discovered bonding primer. I had lots of dark wood in my home that I wanted to change to white. This bonding primer has a glue type material in it so the paint really sticks to it. Little or no sanding required and I choose 'no' sanding.