Ive taken up painting on different types on mediums..one is light bulbs and I love doing it. Some of the patterns I see and try to copy have feet to make them stand up and I wondered if anyone knows what material they use for these feet. Here Ive used styrofoam but it doesnt look right. The photos on pinterest look like a more solid material. Does anyone know what this is?
Looks like you have done a great job with this one. I did many of these in the past but never made one to stand alone. They are hanging ornaments. Good luck with your project.
I was just telling my mom about the snowman and she reminded me of the tweetie we did years ago. I will have to call and tell her of the grinch. We glued the tweetie bird to a small craft board and painted it black.
that was my next thought WannaB. I havent used it yet so will have to do some trial and error to see what works..Barbie never thought of wooden hearts..thanks girls you are helping alot.
A strange idea, born of a big mess, and my husbands silly comments: what if you use a small water balloon, fill it partially with spray foam, sit the light bulb on it after it expands a bit. When the foam is dry, take off the balloon and paint the foam. You could also carve the foam after you take the balloon off. (The big mess was a dropped can of spray foam that squirted all over the place. I don't remember what my husband said, but the idea I came up with at the time was to make pumpkins in the same manner as described, and form them while still soft in the balloon.)
Lol Nancy. The spray foam isnt a bad idea tho....wondering if I could find a small mold thats flat and spray the foam in making sure its level and then let it harden. The problem Im having is getting something level to set the curved bulb on so it will stand up.
you know polymer clay might work for you ...you can bake it for a short time and it gets hard and then you can paint it the color you need it to be... its fun to work with...
but your little bulbs are just so super cute.. i love them..
When I worked for a craft maker we used 2 and 3 inch wood hearts. They were put on the bottom of bells, eggs made into birds. Whatever we needed feet for that was our first go to.
Looking for knobs for my kitchen cabinets. I recently painted them a cream/off white color and would like something to fit in with the farm house. We are a John Deere... See more
I would like to update these lights. I have two one in entry way other in the hall. I can't bring them lower because hubby is very tall. Any good ideas?
I stumbled upon this beautiful Barley Twist desk and chair at an Estate Sales. I do not know anything about it. I only know that I HAD to have it. I had never... See more
Have 3 openings between 1st and 2nd level of split level home. Would like something simple to make it so you don’t see thru from one room to the other. I was thinking... See more
https://www.zillow.com/homes/240-Blackhawk-Dr-New-Castle,-CO,-81647_rb/65495807_zpid/?We are buying this house, and I am wondering what I could do to decorate when we... See more
Ok my fellow diy'ers, I recently saw a project on hometalk where they showed how to make Roman shades from mini blinds. I really want to do this but was wondering,... See more
You know how you buy rolled up area rugs? I bought one from Kohls 4x6. I am having trouble getting it to lay down and be smooth. Not wrinkly. Not curling up on the... See more
I would like to hang a painted mirror in front of the existing builders grade frameless mirror in the bathroom. I would like to hang it so that a small amount of the... See more
Does anyone have any suggestions for a mat/board to use when putting a jigsaw puzzle together? Due to downsizing, I no longer have the room to leave a puzzle out when... See more
I have wire shelving in a pantry where I keep my heavier small appliances...but the feet sink through the shelves, get stuck, etc. Plastic liners in rolls are too... See more
Has anyone ever used colored Cellophane on a fluorescent light fixture? We cut cellophane and taped it on the inside against the box panel cover. The effect is... See more
I want to update my guest bath which has a large mirror over the single sink with vanity but very little money. Suggestions would be greatly appreciated
Looks like you have done a great job with this one. I did many of these in the past but never made one to stand alone. They are hanging ornaments. Good luck with your project.
This is the latest I did and from the picture on pinterest it has some kind of base for feet but I can tell what it is made of.
Too cute! We did reindeer one year at church that hang on the tree. I have never seen a snowman tho. I love him!
Ive done several Santas, the Grinch, Rudolph, various snowmen etc . They are fun too do
I was just telling my mom about the snowman and she reminded me of the tweetie we did years ago. I will have to call and tell her of the grinch. We glued the tweetie bird to a small craft board and painted it black.
here is one Ive seen..the feet look like wood but its hard to tell
@Glenna Kennedy really cute Santa and bunny - think the wooden heart for feet is a great idea
maybe they aren't meant to have feet....
some are some arent. Ive done bulbs for the Xmas tree that hang but several have feet to stand
Looks like a small wooden heart painted to look like feet. I like your snowman with the snow better though :)
Have you tried clay? You can buy oven baked or air dry to sculpt the feet or any type of base.
that was my next thought WannaB. I havent used it yet so will have to do some trial and error to see what works..Barbie never thought of wooden hearts..thanks girls you are helping alot.
A strange idea, born of a big mess, and my husbands silly comments: what if you use a small water balloon, fill it partially with spray foam, sit the light bulb on it after it expands a bit. When the foam is dry, take off the balloon and paint the foam. You could also carve the foam after you take the balloon off. (The big mess was a dropped can of spray foam that squirted all over the place. I don't remember what my husband said, but the idea I came up with at the time was to make pumpkins in the same manner as described, and form them while still soft in the balloon.)
Oh, and I like the base in your first photo just fine. I thought you were trying to figure out how to make one like that! lol
Lol Nancy. The spray foam isnt a bad idea tho....wondering if I could find a small mold thats flat and spray the foam in making sure its level and then let it harden. The problem Im having is getting something level to set the curved bulb on so it will stand up.
@Glenna Kennedy with the balloons, you would only have to sit them on a flat surface while they hardened.
you know polymer clay might work for you ...you can bake it for a short time and it gets hard and then you can paint it the color you need it to be... its fun to work with... but your little bulbs are just so super cute.. i love them..
Thanks Melody I have fun doing them....I paint pavers too..they come out so cute as well. This is one I just did for Valentines day
ohh post some of the pavers too i would love to see them :)
sorry the pics are a little fuzzy
made this for my hair dresser
here are a couple more
Styrofoam cut into shape of shoes and painted black would work
Most people use Sculpy, Glenna. Your local craft store should carry it :) Have Fun!
Never heard of sculpy, thank you for telling me about it TI :)
When I worked for a craft maker we used 2 and 3 inch wood hearts. They were put on the bottom of bells, eggs made into birds. Whatever we needed feet for that was our first go to.