When using a sander what's the difference in grade of sand paper?
Related Discussions
Why is it important to wear a mask when sanding?
You said you had a bad experience from sanding without a mask. Could you give me any info in that so I can encourage my brother to use one
Has anyone been able to locate "Wood U Bend Moulding" in the US?
There is a molding being sold in England, at least, called Wood U Bend. It can be heated to allow bending. I have not yet found a source from which to get it in the U... See more
What kind of saw did you use to cut the dresser in half?
How do I make a template to drill holes for cabinet hardware?
We had cabinets installed without hardware. Now we want handles and knobs but will need to put them on ourselves.
Caulk gun? what am I doing wrong?
I'm a senior, attempting to use caulk gun for the first time. Have my "cannister" of caulk, cut the top off ... nothing will happen. Takes all my strength to "pump"... See more
What are the best screws for use on corrugated metal?
I am putting up a backsplash using a sheet of new corrugated metal. What is the best type of screw to use for attaching this to the studs on the wall? I need somethin... See more
it makes a huge difference, depending on what your sanding. If it’s s table, or hard wood floors. How hard or how fine you need to sand.
A lot, how deep you want to sand? There is a fine grade that doesnt go as deep. Many different grades if sandpaper
The higher the number the finer the grit. It should say on the package what that particular number is for (the low numbers are for rougher finishes like paint removal, the higher numbers are for the last sanding before painting or staining, or "finish sanding", etc.). Not sure if this is what you were looking for. Good luck with your project!
Always ask a professional, that answer is just a start. 😀
The higher the number on your sandpaper the finer grit it is. Like 200, 220, 300 and up. You would use this for something that would need a nice smooth finish, like cabinets or a nice table. When using a low number like 60, 80, or 100 grit. This is very rough sandpaper, especially used for really rough wood like pallets and pretreated wood And metal as well.