What's the best way to paint ugly old dark paneling in my kitchen?
I I have ugly old dark paneling in my kitchen. I want to paint it. Most of the kitchen is his ugly dark paneling. It's been up here since the early 70s. Too much of a chore to take it down too expensive to replace with something else. So what's the best way to go about painting it?
Related Discussions
Should I paint or stain my oak kitchen cabinets?
I was wondering if you could help me with something -- I have an entirely oak kitchen. I know it's the rage now to paint or gel stain cabinets. I've been considering ... See more
How to paint a metal front door?
How do I paint my front door? It's metal.
How to paint grout?
How do I paint grout to change the color? The grout is in great shape, but the color - meh.
How to whitewash a brick fireplace?
What is the best method to whitewash bricks surrounding a fireplace?
Am I the only one?
I don't want to sound like a total "hater", but am I the only one who doesn't like distressed furniture? I see so many beautiful pieces of furniture that would look o... See more
Can I paint my popcorn ceiling?
I have been painting my walls and notice that my ceiling looks yellowish. Can I paint this ceiling as well? I'm up for any ideas
Asl lowes or home depot. Tbey suggest the best methods and have tbe supplies.
If you prime it first with something like Kilz, you should be able to paint it with any paint/color you want! 😊
First you would need to do a thorough cleaning with a degreaser to remove the accumulation of decades....krudkutter is a good option as is tsp and water. As far as the painting is concerned, you could do almost anything depending upon what finish you want as well as the amount of prep work you are willing to do. I personally hate sanding, so I would likely choose an a chalk paint or fusion mineral paint (or any paint that doesn’t need a sanded finish to start). If you’d like a shinier or more protected finish, you could then topcoat with polycrylic to seal and/or add shine.
I would but you need to make sure there is no grease on the paneling or the paint might not stick.
You can cover it with thin wallboard, then paint. I just washed mine with TSP, then painted it with a quality paint that had primer in it.
Hello Sharon,
I understand your situation. We have a log cabin and too much wood is dark and dreary. You can see in the photo below -outside the one doorway how dark the cedar walks are. We are quite pleased the previous homeowner placed paneling in two bedrooms and painted it a light color. I would suggest not to hesitare to your paint paneling for a room brightening update.
I think you’ll be really pleased with your results. Best wishes in your paneling painting adventure! Heres some helpful links!
https://www.hgtv.com/design/decorating/design-101/painting-wood-paneling
https://www.hgtv.com/design/decorating/design-101/painting-wood-paneling
Sharron, these folks have provided good answers, I would like to add you will need to clean the paneling first to remove grease and dust, (no offense to your housekeeping!) Every kitchen gets dusty and greasy. You might also need to sand it a bit to remove gloss of any clearcoat that it may have and to rough the surface so the primer will hold on.
You can do this! A previous owner painted one paneled room of my house and we've repainted the room a few times over the 30+ years we've lived here. It still looks good!
I also dislike paneling so I've painted a couple of dozen rooms over the years - still working on the living room in our current home. Here's what works best for me:
Wash all the areas with a strong solution of TSP (trisodium phospate - available at WalMart, Lowe's, etc.) Fairly inexpensive and worth it to get rid of the accumulated grease/smoke, etc.
Fill small holes with wood putty, caulk, etc. When dry, sand and smooth.
Most paints are now primer/final coat in one, so purchase the best you can afford in a Satin finish - you'll be glad you spent the extra money for better paint when you see the results.
If you can't find that kind of paint then use Kilz or Zinsser for the prep coat - which also means you avoid sanding the entire walls :)
I don't use "Flat" or "Eggshell" because marks and bumps are readily visible - you'll then have to 'touch up' the marks.
Plan on painting at least two thin coats - maybe even three, depending on how dark the wood is underneath. The final color will also depend on how dark the underneath wood is - I know it's probably boring but Antique White has always been a go-to for me - it has a warm feel, is light but not stark white.
If you want 'shiny' walls then use a Semi-Gloss finish - no need to seal with polycrylic.