How to replace countertop and backsplash with ceramic tiles.?
My countertop and backsplash is 40 years old and I want to replace with ceramic tile. I don't know how but want to learn. Can you help
Related Discussions
How do I install an adhesive backsplash in the kitchen?
Wanting to put some kind of adhesive tile backsplash in kitchen, do I need to prep the walls first? I am thinking of the peel and stick covering. Any suggestions woul... See more
How do I redo the grout on the Granite Countertop and the Backsplash?
The grout where it is sealed between the granite countertop and the backsplash is breaking and coming out. What do I use to redo this? What material do I need to bu... See more
Can I use peel and stick tiles on my fireplace?
I would like to use stick and peel tiles on this fireplace renovation. Has any body else used them and was it difficult? I want to use them around the black insert. T... See more
I bought a house with tile countertop. How can I cover and hide grout?
I want to have a nice countertop and cupboards but apparently tile was on sale so they put it every where. Is there a way I can cover and replace without getting rid... See more
how easy/hard is it to replace tile countertops with granite and leave backsplash tiles in place?
am hating my white tile/grout countertops - always dirty - but love my blue white checked backsplash - french country look. need an alternative countertop and island... See more
How do you use spacers when installing wavy backsplash tile?
I am going to install 3x6 glass subway tiles for a kitchen backsplash. This style design has uneven, "wavy" edges all around … so how do you use spacers w/this styl... See more
Tile is not difficult, it just requires attention to detail. First off, though, I have to say that I don't like most tile counters. The grout always collects debris. They are hard to keep clean.
If you must use tile, use very large floor tiles and very narrow grout lines.
Tile needs a base that won't flex. Most people use backer board. Then use thinset mortar. This is the glue. You butter it on with a trowel and then scrape it off with the teeth edge of the trowel so there is an even distribution of mortar lines equal to the depth of the trowel teeth.
Lay tiles on the mortar, leveling gently as you go. A straight edge will help you to feel for differences in tile elevation.
Use tile spacers in between each tile to help maintain uniform grout lines.
Allow all to dry according to the mortar directions.
To grout, press in your grout float. Work it diagonally across grout lines. Using a large sponge with clear water, wipe away excess.
When you think all the excess grout is cleaned up, it's not. Change your water and do it two more times. Your rinse water should run clear.
Allow grout to dry for at least two days, then use a grout sealer according to the package directions.
What is the counter made of? What is on the backsplash? Thinset mortar will not adhere to laminate. Backer board is not needed unless making a counter from scratch.