How do you paint formica cabinets?

Very simply, sand them apply kilts oil base primer, remember to tape them off then paint with any latex paint. I like Behr marquee, easy to apply, no drips. Good luck. I've done that to several cabinets and they look brand new plus it's cheaper than replacing.

Hi Anne, treat the cabinets the same way you would any other painting project:

Clean with TSP. Allow to dry.

Sand lightly.

Use tack cloth to remove all sand residue and dust.

Use a primer that will adhere to wood and laminate.

Paint using a quality brush or a foam roller designed for furniture.

Seal, if necessary. If you are not using a cabinet quality paint or oil paint, it is recommended to seal using a water based sealer.

For cabinets and furniture, remove the doors and all hardware and hinges.

Take your time. Don't try to rush the job and you'll be proud of the finished project.

Happy DIY'ing!

Make sure they are clean and dry. Remove the doors and hardware. Mark the doors and cabinets with tape where they go. Lightly sand the doors and cabinets to remove any gloss and roughen the surface for paint with 220 grit sandpaper or a green Scotch Brite pad.. Use a tack cloth or damp rag to remove dust after sanding. Prime with a stain blocking primer like Zinsser 123, KILZ,or BIN and have it tinted to the color of the top coat. This will prevent dark or stained surfaces from showing through the top coat. Acrylic, or water base paints are low-fume and clean up easily with water. Alkyd, or oil-base, paints require good ventilation because the paint contains solvents that can irritate your lungs and make you feel sick. Alkyd options require mineral spirits for cleanup, but they provide a hard, durable paint finish. Whichever you use, buy the best-quality paint you can afford for a lasting kitchen cabinet finish. Seal with at least three coats with a water based polyurethane. Use a small foam roller and foam brush for a smooth finish.