This set is old, has glazed/shiny paint, what and how do I repaint a different color on wrought iron? Thank you, Nancy Bacon
How do I repaint glazed/shiny painted wrought iron patio furniture?
This set is old, has glazed/shiny layer over the paint, what and how do I repaint a different color on this wrought iron? I believe this set will meet my patio needs for the next 100 years, so sturdy and classic design, just want to change the color. Thank you, Nancy Bacon
This set is old, has glazed/shiny paint, what and how do I repaint a different color on this wrought iron? I believe this set will meet my patio needs for the next 100 years, so sturdy and classic design. Thank you, Nancy Bacon
Related Discussions
Should I paint or stain my oak kitchen cabinets?
I was wondering if you could help me with something -- I have an entirely oak kitchen. I know it's the rage now to paint or gel stain cabinets. I've been considering ... See more
How to paint a metal front door?
How do I paint my front door? It's metal.
How to paint grout?
How do I paint grout to change the color? The grout is in great shape, but the color - meh.
How to whitewash a brick fireplace?
What is the best method to whitewash bricks surrounding a fireplace?
DRESSER BEFORE AND AFTER: KEEP OR LOSE THE BACKBOARD?
Opinions Please! I got this very plain damaged dresser and was at a loss to what to do with it. I was inspired to glam it up. The top is stained and the finish is a b... See more
Am I the only one?
I don't want to sound like a total "hater", but am I the only one who doesn't like distressed furniture? I see so many beautiful pieces of furniture that would look o... See more
wire brush very well then use Rustoleum spray paint
I would have it to a sandblasted. then you can prime it and paint it. It would look like brand new.
Liquid sand solution may make prep easier to degloss previous finish as long as finish is in good shape with no peeling or flaking. Rustoleum definitely good choice. I used oil based on my set and it has held up for nearly 10 yrs. Under covered deck with open sides so they still get some exposure to the elements and are left out in Iowa weather. Grandparents old "Florida set " purchased in the late 50's.
Rustoleum as suggested, buy 1 can, it's specifically made for metal, and check it out on an inside leg. Rustoleum is made for this, paint n primer in one, I have cleaned n repainted alot outdoor things with it n still looking good. Light sanding first. I even painted a cement planter with a shiny paint on it and it did great.
I would sand, sand sand. Apply two coats of Kilz (drying in between) sand with fine grit. Instead of Rustoleum- I would find a color I was crazy about and get an exterior sample can and paint- two coats and seal.
THE EASY WAY IS NOY ALWAYS THE BEST WAY!
If these pieces have been powder-coated they will require lots of sanding of every bit of the surface. You may want to look into the cost of powder coating them for a more permanent solution. Best wishes.
you could try a water based deglosser (follow instructions) then a good primer and then repaint. wire brush any rusted areas before priming..not the best but if care is taken it will work. obviously sand blasting is best but costly unless you have your own or access to one..