How can I lighten gel stain?
We have a honeyed oak finish on our cabinets and want to have a darker finish. We tried a gel stain (Dark Walnut Old Masters) in the utility room and half bath first. Despite watching all the videos, wiping it on and off, then brushing it on, the gold is covered, but it looks very dark. We've worked on this most of the week and are ready to sand and start over. Very discouraging.
Related Discussions
Should I paint or stain my oak kitchen cabinets?
I was wondering if you could help me with something -- I have an entirely oak kitchen. I know it's the rage now to paint or gel stain cabinets. I've been considering ... See more
How to paint a metal front door?
How do I paint my front door? It's metal.
How to paint grout?
How do I paint grout to change the color? The grout is in great shape, but the color - meh.
How to whitewash a brick fireplace?
What is the best method to whitewash bricks surrounding a fireplace?
Can I stain a darker stain over lighter stain?
I don't want to strip existing stain. Can I stain over with darker stain?
How can I tastefully lighten wood beams on ceiling?
I have DARK wood beams in my living room and I want to lighten them without painting them. They are a rough cedar-ish kind of wood and appear to be solid pieces (alth... See more
You can use mineral spirits to lighten the color somewhat. Here is a good site that goes into detail:
http://www.angiesroost.com/2013/06/12/how-to-lighten-stain/
Gel stain is like a semi-transparent paint that really isn't absorbed into the wood grain very much. So its gonna be as dark as the swatches show. Walnut being very dark in any stain. I would use a stripper to remove it. If you find its been absorbed into the grain, I would use Kleen-Strip that removes stain but is pretty toxic so do it outside or in the garage or area where you get really good ventilation and wear a mask and gloves.
Did you first remove the finish off the cabinets by stripping or sanding it off? If you want something to show the grain, I would suggest a stain.
The goldness of oak is usually the shellac/poly finish thats been exposed to UV light, so be sure if you put a finish on to use water-based poly.
Thank you! Sound advice.