I have a tension rod in my shower and have had no problems....there are white plastic cup thingys on each end and they do not slip nor slide on the wall, while keeping taunt.
I’m wondering if it’s just a clog of beach sand that keeps coming up or a bigger plumbing issue. I don’t want this to reoccur, so any information on why this ha...
See more
This accent wall was done by the previous owners, by hand. I would really like to update it, maybe paint it. Possibly a charcoal color? What are your thoughts?
I have this empty space in my bathroom. Originally it was for a built-in laundry hamper. Please provide suggestions on how or what to do with this space?
Hello i would appreciate yogur help, my attic bathroom hace the shower in the higest part, next os the sink and opposite is the bath. I need a new plug in the lowest ...
See more
We are installing a new bathroom vanity in our half bath. The walls are not square so it doesn't fit snug. I am worried about water and the gap. Any ideas?
If it’s an adjustable rod, it will unscrew a little more to make it tighter
Or you could buy those little plastic C looking cups and set the shower rod in those. Should be available at any hardware of big box store.
Been there. It's so irritating.
These things work good. You might have to get two sets and use only the open one from each set for both ends of your rod.
https://www.homedepot.com/p/ClosetMaid-3-in-Closet-Rod-Side-Wall-Bracket-2-Pack-1058/100144901
I have a tension rod in my shower and have had no problems....there are white plastic cup thingys on each end and they do not slip nor slide on the wall, while keeping taunt.