Can oxi clean with bleach clean cement
Related Discussions
How to clean a mirror without streaks?
Every time I clean my mirrors, they end up having tons of streaks and almost look worse than before I started. What could I use to clean them that won't leave streaks... See more
How to clean burns on stainless steel pans?
Help! I burned my pan. How do I clean stainless steel cookware that's been burned?
How to clean shower doors
How to clean glass shower doors
How to clean my kitchen cabinets from grease?
My kitchen cabinets are embarrassingly greasy. Please share your degreasing tips with me so I don't have to cringe every time I glance at my cabinets.
How to clean hardwood floors in the kitchen?
What is the best way to clean hardwood floors in the kitchen?
How can I clean fertilizer stains off of a concrete sidewalk?
Can someone please help me!!!! I have stains on a new concrete sidewalk from fertilizer I did not timely sweep off. I’ve tried everything. Any suggestions?
How can I clean a dirty concrete bird bath?
I have a very dirty concrete bird bath that I would like to clean & paint. Can someone advise me what to use to clean the bowl & what kind of paint would be best for... See more
For a lightly soiled patio, you can remove dirt with a cleaner and a stiff brush. You can use bleach mixed with water. ... Oxygen bleach (like OxiClean) is a safer option. Dilute with water and spray on the patio, then rinse off.
I don't know if I would mix chemicals like that together. It might work, the bleach would fight the stains in the cement and a soak with oxy may further the process if the stains are something the enzymes would fight. I would use oxy first, rinse and then soak it with bleach. I would scrub in both, let sit for a while, then rinse after giving another scrub.
If possible I have found pressure washing to be the best on cement.
https://www.diynetwork.com/how-to/maintenance-and-repair/cleaning/how-to-clean-a-cement-patio
WD-40. Did a leaky oil pan leave a big ugly spot in the middle of your concrete driveway? To get rid of an unsightly oil spot, just spray it with a generous amount of WD-40 and then hose it down with water.
Soda (Coca Cola). Here’s how to remove oil stains from concrete drive-ways and garage floors: Gather up a small bag of cat litter, a few cans of cola, a stiff bristle broom, bucket, laundry detergent, bleach, eye protection, and rubber gloves. Cover the stain with a thin layer of cat litter and brush it in. Sweep up the litter and pour cola to cover the area. Work the cola in with a bristle broom, and leave the cola for about twenty minutes. Mix 1/4 cup laundry detergent with 1/4 cup bleach in 1 gallon (3.7 liters) warm water and use it to mop up the mess.
Oven Cleaner. Get those unsightly grease, oil, and transmission fluid stains off your concrete driveway or garage floor. Spray them with Easy Off No Fume Oven Cleaner in the BLUE can. Let it settle for 5-10 minutes, then scrub with a stiff brush and rinse it off with your garden hose at its highest pressure. Severe stains may require a second application.
Kool-Aid. Nasty rust stains on your concrete? Mix unsweetened lemonade Kool-Aid with hot water. Scrub and the rust stain should come right out.
Baking Soda. Salt and commercial ice-melt formulations can stain — or actually eat away — the concrete around your house. For an effective, but completely innocuous, way to melt the ice on your steps and walkways during those cold winter months, try sprinkling them with generous amounts of baking soda. Add some sand for improved traction.
Ammonia. Tired of those annoying discolorations on your concrete work? To get rid of them, scrub with 1 cup ammonia diluted in 1 gallon (3.7 liters) water. Hose it down well when you’re done.
It would depend on what you are cleaning off of it, but it should work. You might be careful about getting it on any plants nearby as the bleach could be harmful.