There are close to 100 of these!
How can I remove rust on wrought iron fencing?
I moved into a 1.5 acre property surrounded by this rusted fencing. I have experimented with sanding, rust removers/neutralizers and have even considered sandblasting, but have yet to zero in on the the most efficient option to get paint on these without getting the rust back within the year. Have I missed any solvents or other ideas that may make this rust removal any quicker? Thanks for any thoughts!
Related Discussions
How to clean a mirror without streaks?
Every time I clean my mirrors, they end up having tons of streaks and almost look worse than before I started. What could I use to clean them that won't leave streaks... See more
How to clean burns on stainless steel pans?
Help! I burned my pan. How do I clean stainless steel cookware that's been burned?
How to clean hardwood floors in the kitchen?
What is the best way to clean hardwood floors in the kitchen?
How to clean my kitchen cabinets from grease?
My kitchen cabinets are embarrassingly greasy. Please share your degreasing tips with me so I don't have to cringe every time I glance at my cabinets.
What is best way to remove rust from wrought iron columns on front porch?
The columns serve as decorative support for ceiling on front porch. Can the rust be removed with the columns in place? Who does this kind of work?
How can I remove peeling paint from the bowl of a cast iron bird bath?
I was given it by someone who had painted it to make it look pretty, and of course the paint wouldn't stand up to being under water and is now peeling off. I would l... See more
Where are you located? The fact that the rust is recurring so rapidly makes me question what environmental forces are acting upon your wrought iron (excessive rains/humidity/snow ?). Thorough sand blasting or sanding to bare metal, sufficently priming the railing and coating completely with several coats of paint designed for exterior wrought iron would survive longer in zone 6 than has been your case.
Your photo appears to be of a railing in a somewhat protected area.
I had a rusted fireplace screen. Took it to a place that does sand blasting - they used a low pressure machine and it came out great!
There are products available to stabilize rust. As I remember, the stuff is painted over the rust which turns black as it neutralizes. So after the rusty areas are treated you would want to improve and protect all the fencing by painting with Rustoleum.
Hi, Rich,
Your locale will definitely increase the rate of wear on your railings, due to windborne particles. Treating the iron with a rust inhibitor prior to painting would save you the expense of sandblasting, although I'm not sure what it would do in terms of extending the paint's life. You might contact a local wrought iron manufacturing company to see if it's worth coating the paint with a clearcoat sealer, given your environmental exposure issues.
You go with either a rust neutralize or rust converter. For your situation I suggest the rust converter.
https://www.homedepot.com/p/Loctite-10-25-oz-Extend-Rust-Neutralizer-Spray-633877/100371820
https://www.homedepot.com/p/Krud-Kutter-32-oz-Rustex-Rust-Converter-RX326/203397072
Just paint it with rustoleum!