It's a good idea to use a diamond head drill bit on a hard material such as ceramic. Use duct or masking tape over the surface area of the tile where the hole is to be drilled. This helps to prevent the drill bit from walking when starting to drill the hole. Measure and mark the location of the holes and start drilling by applying a light pressure to the drill. Good luck!
I have two 6' patio doors, and I want to add blackout curtains to keep the sun/cold out. What is the best way to hang them, and what can I use to push the curtains ba...
See more
Just turn them upside down and open them, then insert a roll of paper towel and tada, you have yourself a brand new paper towel holder that is not only beautiful, but...
See more
The item is solid wood, standing aprx. 26" high x 16" wide, no exterior holes or outlets, side crank handle turns four wooden paddles inside with various size holes o...
See more
I am looking for the discontinued Pulaski Royale collection nightstand, Neiman Marcus/Horchow also sold it, but called it the Royalty collection. I have looked all ov...
See more
I'm a picker and came across lots and lots of these beauties. I took home several boxes of these purdies and are using for different projects. However, I want to find...
See more
It's a good idea to use a diamond head drill bit on a hard material such as ceramic. Use duct or masking tape over the surface area of the tile where the hole is to be drilled. This helps to prevent the drill bit from walking when starting to drill the hole. Measure and mark the location of the holes and start drilling by applying a light pressure to the drill. Good luck!