Can you use super glue to glue a knob on my skillet lid.
by April Lee
+5
Will the super glue hold with heat on it
8 answers
-
![Janet Pizaro]()
Janet Pizaro
on Aug 08, 2017
https://www.todayshomeowner.com/homeowners-guide-to-glues/ -
![Lucy Nunn]()
Lucy Nunn
on Aug 08, 2017
Is there a screw hole? I'm picturing picking up that very hot lid and it comes crashing down. Sounds scary. I have some lids that are constantly getting loose, and I have to screw together. -
![Dai28481283]()
Dai28481283
on Aug 08, 2017
Superglue will not work -
![Tami Dean]()
Tami Dean
on Aug 08, 2017
Yes. Scrape off old adhesive if there is any. Clean both lid and knob with alcohol before gluing. -
![Judy]()
Judy
on Aug 08, 2017
Does the screw have a tightening screw? I would tighten this every time you wash it. I am not too sure about the glue. Keep asking others, or go to a hardware store, and ask. Also, you can put tissue paper on the screw, and then screw it again, and this may help you. For this little bit of paper, may take up the slack in the screw. Best wishes, J. -
![Judy]()
Judy
on Aug 08, 2017
April, or use a lock washer, then it will not come loose again, or work off. J. -
![Pandalana Williams]()
Pandalana Williams
on Aug 08, 2017
No, it will not. You will need a heat rated glue. Construction adhesive. -
![Kristina Freeman]()
Kristina Freeman
on Aug 08, 2017
I don't recommend it/,\
Lucy Nunn
on Aug 08, 2017
Dai28481283
on Aug 08, 2017
Tami Dean
on Aug 08, 2017
Sign Up to Answer
Suggested Project Book
