How to fix this toilet paper holder

by Lupita
Please help me how to fix this
  4 answers
  • 17335038 17335038 on Jun 27, 2018

    If you snap off the left portion of the holder that is remaining on the wall, you should see that it actually snaps on to a metal plate. The screws hold the plate to the wall. To 'fix' the holder so that the right side stays attached to the wall, you will have to obtain a replacement plate and new screws. You will most likely need plastic screw wall anchors as well, because when you remove these old screws, the resulting holes may be too large to adequately hold the new screws in place.

    Some holders of this style also have a tiny screw at the bottom of the outside cover. Screwing it tightly against the plate will further help to keep the holder on the wall. To remove the holder, loosen the screw. You may need a miniature screwdriver, similar to those sold for fixing eyeglass screws to access this small bottom screw.

    comment photo
    comment photo
    comment photo
  • Joy Stockwell Joy Stockwell on Jun 27, 2018

    used GORILLA I remodeled my bathroom and used. GORILLA SUPER GLUE to install all my towels bars and paper holders 3 years ago, they are still there. So simple.

  • Oliva Oliva on Jun 27, 2018

    If you have drywall, you need drywall anchors and drywall screws. This must not be installed in a stud, or it should not have pulled out.

  • 17335038 17335038 on Jun 29, 2018

    You're welcome.