does anyone have any ideas on removing 16x16 tiles off denshield without breaking them?we are tryiong to reuse some of
-
Woodbridge Environmental Tiptophouse.com on Dec 07, 2011Not going to be very successful if they were properly fastened down. Once the thin set hardens your going to be pretty much out of luck.Helpful Reply
-
-
Terry S on Dec 07, 2011they have been down about 10 yrs , redoing kitchen etc. and dont want to replace 550 sq.ft. of tile. we were hoping to patch?Helpful Reply
-
-
Woodbridge Environmental Tiptophouse.com on Dec 07, 2011If your doing the kitchen over and the cabinets are going in new places that uncover areas that do not have tiles. You can create a border with a complementary tile and then simply go all the way around the kitchen so it looks as though it was that way from the beginning. Many times when tile cracks in kitchens and its no longer around. People simply place another new tile that complements the older then they remove more to create a pattern look. Just how many are you thinking about removing and moving?Helpful Reply
-
-
Terry S on Dec 07, 2011thank you . we will have most of the cabinets in the same areas,but we are downsizing our island and making a walkway about a 9 sq ft area around it instead of it being attached to the wall. i think i may have enough for that but may need to fill other areas and was hoping there was a solution to pulling up some of the existing tiles in a seperate entry and also using those. they are the same as the kitchen is now.Helpful Reply
-
-
Hewitt Remodeling Services LLC on Dec 07, 2011Terry, As Bob said, if they were installed correctly, it is almost impossible without microsurgery" and a month of Mondays...especially with the larger 16" tiles. Consider going with a complementary tile. TimHelpful Reply
-
-
Harold M on Dec 07, 2011I tried this once and found out it was easier and more cost effective to tear them up and install new. Unless your talking about alot of sq. footageHelpful Reply
-
-
Terry S on Dec 08, 2011the problem is the open floor plan.and 550 sq ft of the same flooring. i think im going to try a dremel tool and a putty knife and hope for the best.i appreciate everyones input.Helpful Reply
-
Related Discussions
Should I paint or stain my oak kitchen cabinets?
I was wondering if you could help me with something -- I have an entirely oak kitchen. I know it's the rage now to paint or gel stain cabinets. I've been considering ... See more
The shelf life of Chalk paint?
I have a jar of Ann Sloan chalk paint I bought several years ago. It has never been opened but it has separated. As it was very expensive and I have a project in mi... See more
Help please! What color for the front door?
We're remodeling this 1930's house. We have a new red metal roof & plan to keep the white siding. What would you suggest as a front door color? I love bright, bold co... See more
Curb side find! What would you do?
I found this in the curb this morning on my way to work. Needless to say I'm late :) does anyone know anything about this piece? What would you do with it? Paint? Res... See more
What are your thoughts on painted brick: yay or nay?
Painting bricks can completely transform the appearance of a home, giving it a fresh, modern look or adding a pop of color to an otherwise plain facade.On the other h... See more
Which room would you pick for a room makeover in your home?
We're curious, if you could redesign any room in your home, which is the room you would choose?Whether it's your cozy living room, your bustling kitchen, or even your... See more