Replace carpet in living room with wood floors
-
The Money Pit on Jan 20, 2012Well, you have options: either solid hardwood or engineered hardwood. Both can be super durable IF you buy the version that has the toughest finish (in some cases the finish is even more important than the wood.) Most factory applied finishes are aluminum oxide based and pretty tough. There are also many options in both within your price range (just did a quick search on Lumber Liquidators.com and see a bunch). As for installation, the under-layment procedure will be specified by the manufacturer and also depends on what you are going over. For example, if you are going over concrete, you'd need both a vapor barrier and an under-layment (usually thin foam). So, first pick the flooring, then check the recommendations from the manufacturer. Some of the engineered products may also have the under-layment attached.Helpful Reply
-
-
Ricardo B on Jan 20, 2012If being price conscious is driving the project, you can't go wrong with engineered flooring. Choose a style and color that matches your tastes and or feel of the room by taking samples home. Since various products by different flooring companies have different manufacturing processes, the only thing you need to remember is to... FOLLOW THEIR INSTALLATION REQUIREMENTS.Helpful Reply
-
-
Virginia on Jan 20, 2012Thank you. Yes I am shopping at Lumber Liquidators and I did fine a nice engineered hardwood. How do you feel about Handscraped Birch?Helpful Reply
-
-
HandyANDY - Handyman & All Repairs, LLC on Jan 20, 2012It's an attractive look and hard to beat their pricing....you can get the install work cheaper but sometimes clients find it easier to just do the package with Lumber Liquidators. Just make sure whatever product you use that the wood is allowed to acclimate (sit inside your home) for a couple of days prior to the install....good luck!Helpful Reply
-
-
Virginia on Jan 20, 2012Thank you all so much, I feel better about my choice.Helpful Reply
-
-
KMS Woodworks on Jan 20, 2012Keep in mind that most engineered flooring can not be re-finished like a solid wood floor. Your Ceiling of 3.89 may be a bit on the unrealistic side...if you are considering real wood. Though there are some close to that price point. As a DIY you will want a pre-finished product. Where a real hardwood floors true value come in is in it ability to last. Say you install an engineered product and in 5 or 6 years it starts to look crappy...you now have the option of replacing it with another new floor or dealing with an ugly floor...I you install a real hardwood floor it could be refinished...there by saving you a ton of money... Solid hardwoods can be refinished a good number of times...so their long term value is greater. This is for full 3/4" thick material...thinner floors are cheaper...but lack more sanding potential. http://www.lumberliquidators.com/catalog/product.jsp?productId=1494 If you bump your price up just a little...your options open up a lot more. Remember One floor at $5.00 a sq foot that lasts longer than 4 floors @ $ 3.89...will save you over $10 per sq foot in the long run. You will want to familiarize your self with the various finishes...as I describe in this article... http://www.networx.com/article/exotic-wood-floor-finishes-you-havent-s as well as the Janka...hardness rating system. http://en.wikipedia.org/wiki/Janka_hardness_test As far as Bamboo goes...avoid it ...Its not as green as people think. http://kmswoodworks.wordpress.com/2010/04/18/the-great-green-washing-of-bamboo-flooring/Helpful Reply
-
-
Virginia on Jan 20, 2012See all confused again. I do understand what your saying about a good hard wood floor. And I did look at the Janka system. I will read the article and see if that helps. I am willing to bump up my price range, but I don't want to spend thousand's on a 400 sq.ft room either.I would like a good floor at a med. price range.Helpful Reply
-
-
KMS Woodworks on Jan 21, 2012One of the other "selling" points for Solid hardwood flooring is the resale value they add to a home ( even if this is 20 years in the future)...any decent realtor will confirm this. I have worked on hardwood floors that were 80 to 100 years old...quality never goes out of style.Helpful Reply
-
Related Discussions
Hardwood Floors or Carpet in Bedroom: What's Your Preference?
Hey Hometalkers! We've got a cozy debate going on here: when it comes to bedroom flooring, do you lean towards the warmth of carpet or the timeless elegance of hardwo... See more
Electric stove burners not working? Need help!
I've run into a frustrating problem with my electric stove, as none of the burners seem to be heating up anymore. It's been quite a setback for my culinary adventures... See more
What’s your favorite flower?
Let's brighten up our day with some floral beauty! Flowers come in so many shapes, sizes, and colors, and everyone has a favorite. We want to know: What is your favor... See more
How do I get rid of mole/voles and chipmunks from my garden and yard
I want to get rid of a trumpet vine that is growing on my home.
How do you get rid of Trumpet Vine. It is growing into the foundation of my house. I have tried pulling it out, round up, vinegar and salt. Please share your knowled... See more
What can I do with this DVD stand?
I have a DVD stand that I am trying to repurpose instead of trash. Any ideas?
Huge tomato plants and no flowers!
Does anyone know the cause of my healthy looking tomato plants not producing flowers? I see no insects..water as needed (they're in huge containers) and plenty of af... See more