I have 7 can lights and 3 to 4 of them flicker and burn out faster then the others
-
3po3 on Feb 09, 2012Sounds like a wiring problem along the line to those bulbs. I know there are some electricians in your area who are listed here on Hometalk. You can find them at the top of the page. It should be a quick fix for them, and it will save you the expense of replacing all those bulbs all the time.Helpful Reply
-
-
Woodbridge Environmental Tiptophouse.com on Feb 10, 2012These can lights may be overheating. What is surrounding the light fixtures on the other side? If they are covered with to much insulation or there is not enough clearance as suggested by the manufacture of the light that can be the issue. Also bulb type has a lot to do with it. If you look into the can itself there will be a picture of the types of bulbs that you can use in this type of fixture along with the max wattage allowed. Be sure your following the suggestion of the fixture. You can always convert the fixtures to LED or CFL system. The LED are the most expensive, but they will last a very long time, put out very little heat and some come with a sealing kit to help keep the heat of the room from escaping out of the house through the vent holes.Helpful Reply
-
-
ElectraMedics Electrical Services on Feb 14, 2012The easiest fix, is put compact fluorescent style bulbs in the cans were installed wrong and the heat sensor is turning them off for safetyHelpful Reply
-
-
Solutions Electric, Inc. on Apr 06, 2012Seach for 130V lamps...they cost a little more but will last longer.Helpful Reply
-
-
Brighten Electric, Inc. on Apr 08, 2012It is most likely the socket, if just certain fixtures are burning out bulbs faster. If the connection to the socket is loose, more heat will generate at the bulb causing the bulb to overheat and have a shorter life span. Replace the sockets. They may also be right about the heat sensor. If the fixtures turn completely off and come back on after a few seconds the heat sensors are tripping, but if bulbs just flicker it most likely is the sockets. If you still use incandescent, 130volt lamps will last a lot longer. The down side is they don't burn as bright, but they are still worth the loss of light. A dimmer that slowly comes on and off will also make the incandescent bulbs last a lot longer. www.brightenelectric.netHelpful Reply
-
Related Discussions
Old desk with hard rubber top needs help
I have a very old desk that is in great condition except for the top. It is that old, hard rubber and it has a lot of dings and gashes (for lack of a better term). I ... See more
Do colors have to coordinate for bedroom and bathroom?
I recently got overzealous and bought a shower curtain, towels and rug for my bathroom in a totally different color than I planned on doing in the actual bedroom. Doe... See more
Should I remove plaster and lathe or can I just remove plaster?
I have an 1882 Balloon construction house that has some pretty extensive plaster falling off of the lath. I know that the lath actually adds to the wall stability, a... See more
How do I remove sand paint from the walls of a small bathroom?
Thought it was clever and a great look until I realized that if you fall against the wall it would scrape worse than a fall on cement. My husband is elderly and the l... See more
Has anyone had any luck removing artillery fungus?
Please provide personal success stories on how to get rid of fungus in mulch... not links because I have googled and watched others and tried. My daughter had a load ... See more
Which do you prefer: distressed wood or natural wood?
When it comes to choosing wood for your home decor, the finish can make all the difference in achieving the look and feel you want. Distressed wood, with its rugged c... See more
Repurpose glass crackle globes
I have several old solar lights with the glass crackle globe on top. The solar part doesn't work anymore. What could I do with the glass globes?