We were told by a tiler to do our wall first then he would come in and mud the floor of our
-
Dan's of Central Florida, Inc. on Feb 13, 2012You can do the wall first if you want, but leave the very bottom row of the tiles missing (the row that would be against the floor). That will allow any "wiggle room" that is needed. Plus, the wall tile should be on top of the floor tile (or to put it another way the floor tile should run under the wall tile), that is so that water running down the wall goes over the floor tile instead of between it and the wall tile. What sort of backer board are you using? It should be a cement board such as Durock (a brand). In that case run the board all the way down to the floor, don't leave a gap.Helpful Reply
-
-
Paul M on Feb 13, 2012Dan is absolutely right and for that reason I would always do the floor first. If you do the floor first then your chance of error is about 0.Helpful Reply
-
-
Woodbridge Environmental Tiptophouse.com on Feb 13, 2012I 2nd Dan's comment. Floor first. And when doing so the rubber membrane or lead if its being used. needs to go up behind the wall and at least a few inches above the curb level. And that cannot be done if the walls are already in place.Helpful Reply
-
-
KMS Woodworks on Feb 14, 2012I would have to re-think hiring this particular tile setter....what he is recommending is contrary to "standard practice". This just has me wondering if his skill set is up to par.Helpful Reply
-
-
Jaime L on Feb 20, 2012Another system to consider is a Schluter Kerdi shower system. It comes with a styro drain pan with seperate curb and a waterproofing membrane that all installs using thinset. After the "bones" are installed you can completely tile over everything. The nice thing is that if you are a fairly confident DIYer you can install this and the tile because the drain pan is already formed and it comes with the drain as well. But as the others have said start with the floor tile.Helpful Reply
-
Related Discussions
Blackout curtains behind vertical blinds
I have two 6' patio doors, and I want to add blackout curtains to keep the sun/cold out. What is the best way to hang them, and what can I use to push the curtains ba... See more
How do I stop the pitting on my stainless steel refrigerator?
I have a 7 month old Frigidaire brand stainless steel refrigerator and I noticed pitting and rust spots numbering somewhere around 30 or 40. Is there something I can... See more
How many solar panels do I need for 1600sq. ft home?
How do I make fall leaf luminaries?
I saw someone making gorgeous luminaries with fall leaves, and I want to give it a try. Do you have any ideas on how to make them?
Where can I find a plastic version of cinder blocks?
I want to decorate my roof garden with benches and shelves, but don't want to invest in the weight.