Is there a product that can be used on ceramic floors to cover the chips in it?
-
Dan's of Central Florida, Inc. on Feb 28, 2012Hi Jeannine, How big are the chips? If they are just small chips, you can first, clean the area with soap and water. Let it dry completely, then just use some primer and paint, to match the tile color (don't totally fill the chip, just use enough to match). Then use some epoxy to seal it. However, if the chips or cracks are to big, you'll have to replace the tile.Helpful Reply
-
-
KMS Woodworks on Mar 01, 2012If the chip is near an edge, grout can sometimes be used...this works better on more "rustic" type tiles such as tumbled marble etc. other wise as Dan's mentioned above paint to camouflage or replace the problem tile. Check out this article I wrote on repairing cracked and broken tile. http://www.networx.com/article/cracked-tile-repair-tipsHelpful Reply
-
-
Peggy Volland on May 11, 2015I have had good luck with the little jars of paint made for model planes and cars. Wide array of colors, so I have always been able to match the tile pretty well. You can build up layers of paint, although I have never repaired a chip larger than a quarter coin.Helpful Reply
-
-
Tina on Oct 31, 2015Nail polish works well, and easy to colour matchHelpful Reply
-
Related Discussions
What product can I use to clean Orange Glo off of my hardwood floor?
How do I remove hard water deposits from stainless washing machine tub
My new home's washing machine appears to have a rough buildup near the top of the stainless tub. I have run Affresh through the unit but this remains. I don't want to... See more
How do we remove calcium deposits on our patio water fountain
How do we remove calcium deposits from our patio fountain and brick walkway?
Hardwood Floors or Carpet in Bedroom: What's Your Preference?
Hey Hometalkers! We've got a cozy debate going on here: when it comes to bedroom flooring, do you lean towards the warmth of carpet or the timeless elegance of hardwo... See more
How to remove rust from exterior door hinges without removing them?
If I remove my vynal shutters to paint can I reinstall them using the
Same nails/ screws holes won't be inlarged