Dark Wax Failure
-
KMS Woodworks on May 13, 2013This might be to due to over application, I have found multiple thin layers to work better. Paste wax is a blend of solvent and the solid waxes (carnauba, bee's etc) the solvent allows the wax to be applied in a thin even layer, once the solvent evaporates the wax solids are buffed out. Over application or not allowing the solvent to evaporate can lead to jerking and "sticking" when it is buffed out.Helpful Reply
-
-
Heather (New House New Home) on May 13, 2013Thanks for the info, KMS Woodworks. I think you're right.Helpful Reply
-
-
Heather (New House New Home) on May 13, 2013Thanks for the answers, but I'm still hoping for more ideas.Helpful Reply
- See 3 previous
-
-
The Paint Wagon on May 14, 2013UGH! If I could have 2 minutes with this Annie Sloan lady! I agree with KMS, looks like too much application and too much fussing. With solvent-based materials, the more you try to work it, the more gloppy (is that a word?) it tends to get. You're best with a light coat and walking away. You can also thin the wax with mineral spirits or paint thinner (making it translucent, like a glaze). It will allow it to set-up slower giving you more time to work it. Also you can take some of it off by wiping (hard) with a rag soaked in mineral spirits/paint thinner. Sometimes, I'll even slap the wax on with a chip brush all willy-nilly, let it set-up and then work it off with mineral spirits on a rag. For future projects, you can also use a lighter wax, but use Briwax or similar as it is the same product and costs a fraction of what ASCP is charging.Helpful Reply
-
-
Ginger Mosley, Realtor with UTR-Texas Realtors LLC on May 14, 2013Heather, Annie Sloan suggests, and I have tried, going back with clear wax to blend and lighten any undesired patches of dark wax. This method works fairly well, but the suggestion on a previous post to make a dark glaze by adding mineral spirits to the dark wax so that you can just paint it on evenly may be your best solution. Maybe ask a friend who will tell you the truth and whose taste you trust to look at the piece and see if they like the piece as is. You may be too critical of your own work and the streaking may actually be attractive and interesting to others.Helpful Reply
-
-
Heather (New House New Home) on May 14, 2013Thanks for the advice, The Painted Wagon.....I'm so frustrated with the dark wax. Haven't tried any other brands though. I actually prefer to use Minwax antiquing oil, but it doesn't set up well over the AS clear wax. I guess I could try putting it directly onto the wood and then waxing after it dries. That would give the piece a more even look. As far as over application is concerned, if you look at all the videos and tutorials they seem to use TONS of the dark wax and then work it off. That's what I attempted, but it obviously didn't work. I'm not giving up. I'll keep trying all the suggested methods. Thanks again.Helpful Reply
-
-
Tammy@Deja Vue Designs on May 14, 2013I have had this happen before...you can thin this down with some mineral spirits. It even helps tone it down after you've let it dry on your piece. Dark wax is just really harsh...and I've not found a way to keep it from being too dark when applied aloneHelpful Reply
-
-
Paula Driesell on Jan 30, 2014I totally agree with Tammy! Put some mineral spirits in the dark wax and mix it up. It's actually more like a glaze and you have more time to play with it. I also think it gives most people what they are looking for. The dark wax is for really distressed pieces and should be used sparingly and to highlight certain places. If I'm using dark wax over the clear, I have a 0000 steel wool pad wiping right behind the the dark wax i just applied. I never, use a full load of dark wax and then take it all off. It's a waste of wax/money. Try the mineral spirits. I just did this on a french chair and love how it turned out. Check out my french chair post or the old dresser new life post.Helpful Reply
-
-
Rita on Jan 30, 2014Two ideas. First, perhaps wax with clear and let it dry thoroughly. Then cut the dark wa with some of the clear wax and work in small areas. This worked for me when I, too, was making mud from beauty. Hope that helps. Let me know. I'm still learning.Helpful Reply
-
-
Lisa Cuddy on Jan 30, 2014try rubbing in circles, using several thin coats instead of one heavy oneHelpful Reply
-
-
Jac on Jan 30, 2014I think Rita has your answer - clear wax first. The dark wax then won't grab hold so much.Helpful Reply
-
-
Lisa Cuddy on Jan 31, 2014perhaps the wax is grabbing the brush strokes from the paint. Sand it a little more to get rid of them, then try light applications rubbed in circles. The piece is beautiful and you shouldn't criticize yourself so harshly.Helpful Reply
-
Related Discussions
Should I paint or stain my oak kitchen cabinets?
I was wondering if you could help me with something -- I have an entirely oak kitchen. I know it's the rage now to paint or gel stain cabinets. I've been considering ... See more
How to paint a metal front door?
How do I paint my front door? It's metal.
How to paint grout?
How do I paint grout to change the color? The grout is in great shape, but the color - meh.
How to whitewash a brick fireplace?
What is the best method to whitewash bricks surrounding a fireplace?
Dark waxing over polyurethane, how to do it?
I’ve read that you can add dark wax to antique your furniture after you’ve applied your polyurethane top coat! Also I’ve read that they’re not to be mixed! An... See more