I am remodelling my bathroom, the backwall of my backplash is not straight the drywall curves about 1/2 inch.
-
KMS Woodworks on Mar 16, 2012What type of back spash are we talking here? Tile is often used as it conforms to the wall better. Straight and solid materials are caulked. The best method however would be to correct the crappy drywall...this is done by shimming the stud so the wall is flat.Helpful Reply
-
-
Designs by BSB on Mar 16, 2012KMS question is the most important, what is the material?Helpful Reply
-
-
Johnny J on Mar 16, 2012Material is resin with mixed with marbles. Enginered material?Helpful Reply
-
-
KMS Woodworks on Mar 17, 2012Johnny J....that stuff will not "bend" too well. If it were me I would fix the crappy drywall...(I'm not much for band-aid type repairs). The majority of DIY folks however would simply caulk it. If the gap is more that about 1/4 inch you would be well off to use a "backing rod" this is a foam "pencil shaped" roll of material that fill the bulk of the gap. This allows for a thinner more flexible caulk line to be applied.Helpful Reply
-
-
Designs by BSB on Mar 17, 2012another option is to cut into the drywall where the splash is. Not the best option, but it is one!Helpful Reply
-
-
Johnny J on Mar 17, 2012You can see the bowed wall just above the backsplash, but I think I found a solution. I will nail down or screw on a piece of decorative wood to hide the gap. I will give an update if it is resolved.Helpful Reply
-
Related Discussions
What are your thoughts on painted brick: yay or nay?
Painting bricks can completely transform the appearance of a home, giving it a fresh, modern look or adding a pop of color to an otherwise plain facade.On the other h... See more
How to remove popcorn ceiling that has been painted?
Does having a paint over a popcorn ceiling change how I'd remove the popcorn ceiling?
How can I get evergreen climbing vines that don't attract bees?
Need privacy screen I can train on trellises for my patio. There's lattice there, but not enough to block out neighboring home. This is a mobile home. Would love flow... See more
I am gluing some colored glass gems onto a glass window..
I am using E6000 to attach the glass gems to an old window. I want to make sure that everything will stay attached. I plan on spraying clear Krylon onto the whole gla... See more
How do I get the black marks off my composite deck?
As we all know New England is getting hammered with snow this year! And I had so much snow on the deck that I had to use the snowblower to get it off. I'm anticipatin... See more
How do I remove a rust stain from a wooden deck?
How do I remove a large, deep rust stain from a metal pan off my stained wooden deck?
How do I get grease stains off of composite decking material?
I have a bbq rug under the grill but I ended up getting some grease on the material anyway. Any idea?