Can this door be saved?
Related Discussions
How to get rid of mice?
We seem to have some unwelcome Mickeys and Minnies in our house. What is the best way to get rid of them?
How to remove popcorn ceiling with asbestos?
I want to remove my popcorn ceiling, but it has asbestos in it. How do I go about this safely?
How to caulk baseboard gaps?
How do I fill gaps at baseboard, should I caulk? If so, does anyone know how to caulk baseboards?
How to fix squeaky hardwood floors?
How do I fix squeaky hardwood floors?
How can I resize a screen door?
I got a very old screen door. It is made of 2x4's and put together with tongue and groove. How can I get it apart w/o tearing it up!
Doorknob latch assembly stuck - can't open door
This doorknob was not working so I removed the knob but when I took it off I could not remove the latch assembly so the door is stuck shut. I tried removing the hinge... See more
Hello,
These are stick on plants that use to be manufactured for steel doors before they were able to stamp a panel into the door.
A different option would be to install a door glass insert into the door. The process is simple and much easier than sanding and painting the door. In about an hour you can add decorative glass, stained glass, clear glass, obscure glass or blinds between glass into the existing door. Here is an example:
Hey Lady? Get it repaired? I work for a door manufacturer both exterior and interior doors. Go to your local Lowes or Home Depot---those frames can be ordered and replaced! Steel or fiberglass doors---it makes no difference!
Good Luck! The Door Lady
Hi,
yes it can. I'm a retired union carpenter and my door trim came off. I carefully unscrewed the pegs out of the door and installed them into the trim backing. Screw them in as tight as you can without breaking them, if they won't stay take them out and squirt a small dab of silicone chalk then insert again and let dry (24 hours). Once they are set do the same thing to the door holes, a squirt of silicone chalk[let it ooze out some] . Let this set for about 10 minutes (it will start setting up and that's what you want, it will hold the trim better). Push the trim pegs into the holes with slight pressure and hold for a bit (I leaned my back against the door trim and talked to my neighbor, before I knew it the time flew by!) VAWLA done! Hope that helps you! Happy Holidays!
of course ! You just need to sand it off