I need to drill drainage holes into new decorative planters.
-
Layce on Jun 11, 2016you can use a reg drill bit or rechargable screw driver with long bit. the KEY is to do it in water. make sure the hole and the bit are under water. about 3/4 inch will do. that's it. take it easy with quick burstsHelpful Reply
-
-
MN Mom on Jun 11, 2016I would be very cautious using an electric drill on anything submerged in water. Not sure a rechargeable screwdriver would provide enough "oomph " for something like this. You can purchase a drill bit for glass and ceramic and just drill very slowly. Give it a try on something of similar substance before trying it on your actual planter. Good luck.Helpful Reply
-
-
William on Jun 11, 2016A masonry or glass drill bit for would work, like MN MOM suggests. You can use a rechargeable drill, at LOW speed. Use WD40, not water as a lubricant. Apply very little pressure, let the bit do the work. The weight of the drill should be enough. Good luck .Helpful Reply
-
-
Veronica Davenport on Jun 11, 2016I watched a t.v. show host do this once and have used this technique many times. I use a cordless drill (purchased by myself, for myself, lightweight), some masking tape and a little water. You must use a bit especially made for glass and ceramics. Rest the upside down container on a piece of cardboard (so you don't damage the rim), put an X of tape over where you want to put the hole, add a smidgen of water and drill away. Use a firm but not forceful hand. Practice on some things you don't really care about first. I wouldn't do this myself to a 14th century Ming vase. For anything that is costly, search out a lamp shop to do it for you.Helpful Reply
-
-
Carrol Aizenman on Jun 12, 2016I used a dremel without water & it worked fine. It went quickly & didn't get overly hot.Helpful Reply
-
-
Johnchip on Jun 12, 2016Tape the pot where you are going to drill to help keep it from cracking.Helpful Reply
-
-
Dwa523415 on Jun 15, 2016My husband uses a glass bit for his drill. Run water on the drill bit so it doesn't over heat.Helpful Reply
-
Related Discussions
GNATS - How to get rid of them?
Somehow my house and garden got tiny gnats that killed my fuchsia plant and fly everywhere. I have tried ALL the Web recommendations - soap and oil dishes, sand in th... See more
Growing garlic
Growing our first garlic, should we wait until the leaves are drying out before we pick it? Husband picked first one today along with our first potatoes.
Marigolds growing! Should I pinch the buds?
My marigold plants are growing. I heard that pinching the buds until Autumn will allow them to grow without killing the plant. Is this true?
How to keep mice out of your garden?
Hi everyone, I have mice in my garden destroying my vegetables and I have also noticed them in the barn and shed. Please can someone tell me how to prevent them from ... See more
What's the best flower/plant to grow in Texas?
I know that opinions vary, but what's your opinion?!I have great luck w Rosemary plants. Green all year long.
How do I drill drainage holes into a large galvanized tub?
i have a large galvanized tub I use for plants but I need to drill some drainage holes. Do I need a special drill bit for this? Thanks!