apparently the seal is weak on my gazing ball and am now discovering that instead of being a beautiful opaque emerald green sphere you can now see thru the ball....not what i wanted. is there any way to re-glaze the inside of the ball? any ideas would help. thx
this is the after w/looking glass paint. thx everyone
Pour some irridescent latex paint (from the craft store) inside, swirl around to cover the entire surface, then turn upside down to let it drain out & dry.
Looking Glass paint is meant to work when sprayed on the wrong or inside of glass. I'm not sure with the glass being this dark how well it would work and the paint is a bit on expensive side if it doesn't work.
If you meant iridescent when you said opaque then do as @Joan Williams says.
I don't understand what you mean your "seal is weak" these are not supposed to be displayed "seal" side up and many gazing balls are made to be able to "see" through them if you want your glass to be opaque then use any type of paint inside it fill 1/4 of the way and swirl until the whole inside is coated the prop up so it can drain and dry the if you want it perminatly sealed use a rubber cork and some epoxy
thanks all; the seal is black rubber around the bottom of the glass. typical summer heat (>100) probably contributed to the seal eroding or cracking even tho it was not exposed. The glass was originally a rich green crackled effect that you could no see through. I loved that look. If i spray paint w/looking glass i could go for the vintage mercurial look, but i'm afraid the green will show through.
I saw a DIY project where they glued those little glass/plastic spheres that look like flattened marbles all over either in multi color or all one color, it looked really cool.
I really liked the look of the emerald ball but if that isn't what you wanted, I can see how it would be frustrating. How did you get that cracked look to it?
I recently got a 50+ year old gazing ball that has a wonderful--to me!!!!--old "chippy" mirror paint look to it--but the base on this one is sealed with a large old cork! Now I need to find some way to show this off---where DO you buy just the stands????
Last year the heat built up inside my sealed gazing ball to the point of causing the glass to crack and ultimately fall apart. This year I am going to remove the rubber seal to avoid this issue from occurring again. What is the purpose of the rubber end seal?
It keeps condensation, spiders and ants out. You can wash the insides out using any dish soap just rinse it good. I bought a solar fibre optic garden light on eBay for $ 6 and modified it to go inside our globe so it lights up and changes color at night.
my question is the same, and I have not found an answer, how do i keep the seal on, and at the same time keep my gazing ball from building up enough pressure to force it off, or blow up my ball... anyone...
I have an old camel back trunk that is locked and I can't find the key. Any suggestions on how to get it open or a company that sells this kind of key? Pictures... See more
The builder of our home put a builder grade bathroom vanity against two walls in our downstairs bathroom. He caulked the small gap between the side of the vanity and... See more
I’ve seen a lot of pretty DIY fire pits using paver stones. Are those stones safe to use? I’ve read online that the wrong materials could burst from the heat.
Hello,I needed a pull-up bar and made one using two pipe hangers (1 1/2 inch openings) that I nailed into the ceiling joists with roofing nails and then put a 5 foot... See more
There has been a fairly deep crack located in the sidewalk at the base of the front cement stairs leading to my home’s front door. (It’s maybe about 6 inches long and... See more
Looking to DIY a rock look on a wall. Would like to find something I can sculpt my own rocks with. I have been told cement would be to heavy on a drywall backing.... See more
I have created a faux rock panel for a backsplash over my glass top stove unit. It is about 14 lbs. I am worried that just anchors screws would not be enough. Is... See more
I am using Tsp to clean and degrease my Orange peel textured wall that was already painted with interior latex. The plan is to skimcoat over the paint and original... See more
Hi! I recently laid tiles on top of a wooden dresser and now, after letting the grout dry, it's starting to crack, the tiles have begun to pull up from the mortar,... See more
Your comment...
Why not just spray paint it with looking glass?
Lori J, sorry what is looking glass?
Oops....looking glass spray paint--gives a mirrored surface.
Pour some irridescent latex paint (from the craft store) inside, swirl around to cover the entire surface, then turn upside down to let it drain out & dry.
Looking Glass paint is meant to work when sprayed on the wrong or inside of glass. I'm not sure with the glass being this dark how well it would work and the paint is a bit on expensive side if it doesn't work. If you meant iridescent when you said opaque then do as @Joan Williams says.
I don't understand what you mean your "seal is weak" these are not supposed to be displayed "seal" side up and many gazing balls are made to be able to "see" through them if you want your glass to be opaque then use any type of paint inside it fill 1/4 of the way and swirl until the whole inside is coated the prop up so it can drain and dry the if you want it perminatly sealed use a rubber cork and some epoxy
yes mirror spray paint from michaels.
thanks all; the seal is black rubber around the bottom of the glass. typical summer heat (>100) probably contributed to the seal eroding or cracking even tho it was not exposed. The glass was originally a rich green crackled effect that you could no see through. I loved that look. If i spray paint w/looking glass i could go for the vintage mercurial look, but i'm afraid the green will show through.
My gazing balls do exactly the same thing! Frustrating for sure.. I will be recycling mine this go 'round by doing a mosaic on it with glass tiles.
I saw a DIY project where they glued those little glass/plastic spheres that look like flattened marbles all over either in multi color or all one color, it looked really cool.
Michael and Hobby Lobby sell stain glass window paint.
I am planning to tuck a solar sting of LED lights into mine and celebrate it Day and Night.
I really liked the look of the emerald ball but if that isn't what you wanted, I can see how it would be frustrating. How did you get that cracked look to it?
@Trashy Treasures
the gazing ball came w/the crackled effect
Wow that looks so much shinier than the photo I saw online of it done on the outside. I like it!
I recently got a 50+ year old gazing ball that has a wonderful--to me!!!!--old "chippy" mirror paint look to it--but the base on this one is sealed with a large old cork! Now I need to find some way to show this off---where DO you buy just the stands????
I used a plant stand
my question is the same, and I have not found an answer, how do i keep the seal on, and at the same time keep my gazing ball from building up enough pressure to force it off, or blow up my ball... anyone...