How do I paint a metal bed frame??
Related Discussions
Should I paint or stain my oak kitchen cabinets?
I was wondering if you could help me with something -- I have an entirely oak kitchen. I know it's the rage now to paint or gel stain cabinets. I've been considering ... See more
How to paint a metal front door?
How do I paint my front door? It's metal.
How to paint grout?
How do I paint grout to change the color? The grout is in great shape, but the color - meh.
How to whitewash a brick fireplace?
What is the best method to whitewash bricks surrounding a fireplace?
How do I paint a metal entry door to withstand extreme heat & sun?
I was so proud of myself. I stripped my front door of layers of bad and cracking paint from the previous owners (it was like stripping bubble gum), sanded, bought a h... See more
What should I use to paint a rusted bed frame?
What should I use to paint a rusted bed frame? My rusted old steel bed frame has no paint on it. What is the easiest way to revamp it? What paint should I use?
Spray paint that is made for metal. Several light coats for best adhesion and coverage.
I agree. I used it for my white wrought iron bed which is not black. Takes several coats and spray lightly with several coats to prevent running off the slick metal surface.
Take some scratch pad for dishes, and scrub the metal fairly well. Then get some black Rust-oleum in a spray can and spray it on. It dries fairly quickly, so you can re-coat it in a short time.
I would prime first and then paint it with 3 or 4 light coats.
Rust oleum is great paint.
I agree with Destpete4. I've got a wrought iron and copper bed which I've painted a couple of times, depending on the decor. I had to sand it down and give a coat of rust converter first, primer and the my final outer coat. Rustoleum is a good product and has such lovely colors available now. I would even try Chalk paint which is also a good product especially if you are trying for an antique look. With the Chalk paint I'd suggest a good sealer as the final layer. This isn't a quick solution but the end product is so worth it. Have fun and post the finished product. Would love to see it
I've painted several metal beds - here is what I do: lightly sand first with steel wool or fine grade sand paper (sand out any rust areas); use a spray paint primer (I like Rust-Oleum); let dry 24 hours then use your spray paint for metal (again I use Rust-Oleum) and do a light coat; let dry thoroughly; lightly sand with steel wool; add another light coat; do the same; until it is exactly what you want. Post photos for us to see!
Check on their cans and it tells you you do not need a primer coat, as it has the etching primer in the paint.
//Rust-Oleum® Universal® is a paint and primer in one that provides superior coverage and durability over any surface – it also features a patented comfort trigger that eliminates finger fatigue and sprays from any angle.
IDEAL USE
METALWICKERCONCRETE
WOODVINYLLAMINATE
PLASTICGLASS//
http://www.rustoleum.com/product-catalog/consumer-brands/universal
Yes, yes and yes....you are getting all kinds of good advice! And you live in a place where you can work on this in the winter, too. I have to echo what Russell said and make sure you get the comfort trigger-it makes a BIG difference!