Any suggestions on how to upcycle this old table with reclaimed lumber
Related Discussions
Old Safe.....Now What?!
Like the crazy I am... I bid successfully on this old safe that hasn't been opened because the combination is long since missing. Now what do I do with it ha ha ha...... See more
I have a beautiful cherry wood entertainment center I cant use anymore
Do you have any ideas on what I can do with my beautiful entertainment center? Its tall and holds up to a 40" TV. I have a small home and have a new 50" TV that wont ... See more
Advice for what to do with my Singer Sewing Table...
I found a GORGEOUS singer sewing table that I'm dying to bring some life back into, but I'm terribly afraid of ruining the original charm and character. Here's the ma... See more
Can antique bed be saved?
This antique bed has been in storage for the last 20 years. I recently pulled it out and it's seems so damaged I'm ready to throw it away. It's cracked, warped and di... See more
Antique Steamer Trunk into Coffee Table - should the interior be lined
We have distressed, stained and used poly on this antique trunk and then added legs. The paper was stripped from the interior and then lightly sanded, stained and cle... See more
Any ideas on how to re-purpose the top part only of this hutch?
I just got a fantastic deal on this hutch for a $100.00. I bought it really for the bottom part only. I plan on using the bottom part in our family room as a TV stand... See more
What should I do with my Grandmother's 1930's vanity table
My Grabdmother's furniture sat in her house for a long time after she passed away without air conditioning or heat. By the time I got to it a lot of the veneer was c... See more
I would use 2 trim-head screws on each side to hold it in place; they are small and wouldn't show up much. Also, I would run another piece of board down the center underneath, wide enough to support the inside end cuts of the herringbone. Whatever thickness you use should also be used on the outer edges to support the top so it doesn't "rock". You might want to consider making the outer perimeter skirt a little wider ( top to bottom ) so that your original frame doesn't show, due to the additional pieces underneath..
Thank you, Larry. I will pass the info on to my husband.
Are you sure you don't want to just repaint it? I really like it.