Help used Annie Sloan’s black wax-how do i remove the wax and prep?
Related Discussions
Should I paint or stain my oak kitchen cabinets?
I was wondering if you could help me with something -- I have an entirely oak kitchen. I know it's the rage now to paint or gel stain cabinets. I've been considering ... See more
How to paint a metal front door?
How do I paint my front door? It's metal.
How to paint grout?
How do I paint grout to change the color? The grout is in great shape, but the color - meh.
How to whitewash a brick fireplace?
What is the best method to whitewash bricks surrounding a fireplace?
I used Annie Sloan white chalk paint and wax. Why does it look yellow?
It looks like either the wax turned it yellow, or maybe something bled through. How do I fix it? Thanks for your help!
Should I re-stain or paint my cabinets?
Edit:””” 3 years later😂 I decided to paint them white and I am so very pleased with the results!We bought a new house with these ugly cabinets. I really cann... See more
You can try removing it with some mineral salts. Use a damp rag and rub in the direction you paint. But it is also possible that if it's chalk paint, you can just paint right over it and start again.
If the wax is fully cured (2-3 weeks) you can repaint it and start over. If the wax is fresh you will need to remove it with mineral spirits before repainting. I use one of those green scrubby pads dipped in mineral spirits to remove wax. Just be sure to go with the grain of the wood. Also, always use clear wax before dark wax so you don't end up with dark blotchy patches on your piece.
And if all that fails, you could seek the help of the Annie Sloan company directly. https://www.anniesloan.com/
Yuck! I had the same problem when a client changed her mind on color after the piece was waxed. I cleaned it off with isopropyl alcohol, a plastic scrubby, then a quick sand. The repaint went on without a problem.
I made the mistake when I first started with waxing...I used dark wax only. Big mistake unless you like it that way. use clear wax to seal before using any dark or colored wax. It will seal and not have the colored wax set into the paint or wood. Always use a test piece (I learned that the hard way too). Good luck!
I had a buffet I wanted to paint that was clear waxed when I got it. Impossible to paint correctly with this uneven finish as it had water spots from plants and general wear. I used mineral spirits, but stopped since I had to do this piece in my living room! Ended up scraping it CAREFULLY with a razor blade and a metal and plastic scrubby, sanding with heavy duty sandpaper, fine sandpaper, and finally Kilz to seal. Not a wax fan and I know I'm in the minority, but just too permanent unless you keep that look forever. A LOT of hard work and broken fingernails, but it turned out really nice so worth it.
.Denatured alcohol is the best way to remove the wax. Be sure you do it in a well ventilated area
Thank you Ladies yes a tough lesson to learn! Thankfully my client is super forgiving and we are working to make it better. The mineral spirits did help and another coat of paint and back to a workable stage. Thanks for the info on using clear wax first.