I have a concrete lawn statue which has broken in half.
Related Discussions
Blackout curtains behind vertical blinds
I have two 6' patio doors, and I want to add blackout curtains to keep the sun/cold out. What is the best way to hang them, and what can I use to push the curtains ba... See more
How to make a balloon garland?
Does anyone know how to make a balloon garland or a balloon arch?
Does anyone know what this is?
Just turn them upside down and open them, then insert a roll of paper towel and tada, you have yourself a brand new paper towel holder that is not only beautiful, but... See more
Can anyone identify this vintage wooden crank box?
The item is solid wood, standing aprx. 26" high x 16" wide, no exterior holes or outlets, side crank handle turns four wooden paddles inside with various size holes o... See more
What to put in this huge mason jar?
I have a HUGE mason jar. I would like some ideas on what to put in it for decorations, other than flowers.
How can I find discontinued Pulaski or Neiman Marcus/Horchow furniture
I am looking for the discontinued Pulaski Royale collection nightstand, Neiman Marcus/Horchow also sold it, but called it the Royalty collection. I have looked all ov... See more
Ideas on different things I can do with these yummy old spools?
I'm a picker and came across lots and lots of these beauties. I took home several boxes of these purdies and are using for different projects. However, I want to find... See more
I would use thinset for setting tile on both pieces. Use a 1/2" notched trowel.
I watched this YouTube video and I think it may help. There are several on the site, so I hope this helps. I did read in an article online, that you will want to remove any crumbly material, dirt, etc. so that you have a better adhesion. Good luck! https://www.youtube.com/watch?v=cD1dz2BJ5QE
I would drill some small holes opposite each other on the two pieces to be joined, and get some thin metal rods to fit in the holes and a couple inches long, then set them in the concrete with epoxy on one side, let set up, and then add the other piece using epoxy. You will need a masonry bit for your drill the diameter of the rods. You can find these rods at a hardware store like True Value usually in same bin as the wooden dowels.
One thing to make sure of when using concrete epoxy is that it is bone dry. Even a little but of dampness can undermine the effectiveness
Call your local concrete company and ask them or use plasictrete to fill it in where it's broken