How difficult is it to change out a screen door? Thanks.
![A](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-A-F1C40F.png?size=91x91)
Related Discussions
How to get rid of mice?
![Jessica Hill](https://cdn-fastly.hometalk.com/media/profile/2021/08/22/107358_1.jpg?size=50x50)
We seem to have some unwelcome Mickeys and Minnies in our house. What is the best way to get rid of them?
How to remove popcorn ceiling with asbestos?
![Abby](https://cdn-fastly.hometalk.com/media/profile/2021/02/07/50639059_1.jpg?size=50x50)
I want to remove my popcorn ceiling, but it has asbestos in it. How do I go about this safely?
How to caulk baseboard gaps?
![Sharon](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-S-59A1F4.png?size=50x50)
How do I fill gaps at baseboard, should I caulk? If so, does anyone know how to caulk baseboards?
How to fix squeaky hardwood floors?
![Frisco's Cards](https://cdn-fastly.hometalk.com/media/profile/2017/01/27/18563525_1.jpg?size=50x50)
How do I fix squeaky hardwood floors?
Tips for updating or repairing Pella between the glass blinds?
![Evelyn](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-E-605BE8.png?size=50x50)
Our 14 year old cord controlled blinds are all giving us trouble with raising and lowering and tilting. Many of the top mechanisms are coming unglued from the top. I ... See more
Brr! Drafty windows- how to cut the draft?
![Dfm](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-D-69E0FF.png?size=50x50)
I have 3 sets of windows configured like this...very drafty, How to you winterize them? There is nothing in the corner to stick tape to. Thank you
It is not difficult if you follow the directions--usually they are step by step. It takes time and yes--there is some frustration! I would enlist the help of another person--for holding things and another perspective on the directions!
The screen or the entire door? Either is relatively easy. The door just pops in the tracks with spring rollers. So replacing the door just means you need good measurement to purchase a new one. If replacing the screen, purchase screening to fit, must be wider than the frame. New rubber screen cord the right width, and a little tool to put it in. Lay the screening over the door and start at a corner. Push the cording down over the screening into the channel. As you get to the third side, begin to pull the screening taut from opposite side and on the fourth side as well. Once done, trim the excess screening material close to the edge. I use a razor blade box cutter. Just be careful not to cut yourself in the process!