What is the easiest but best way to fill in holes before repainting?
Related Discussions
Should I paint or stain my oak kitchen cabinets?
I was wondering if you could help me with something -- I have an entirely oak kitchen. I know it's the rage now to paint or gel stain cabinets. I've been considering ... See more
How to paint a metal front door?
How do I paint my front door? It's metal.
How to paint grout?
How do I paint grout to change the color? The grout is in great shape, but the color - meh.
How to whitewash a brick fireplace?
What is the best method to whitewash bricks surrounding a fireplace?
What is the best way to punch a hole in a resin planter?
What is the best way to repaint a peeling steel bulkhead door?
Have a steel bulkhead door that looks horrible because the paint always peels after painting. It came primed but peeled after it was painted. Scraped away as much of ... See more
https://www.lowes.com/projects/repair-and-maintain/patch-and-repair-drywall/project
Use spackle, then sand flat.
Tiny little tubs of spackling are available at hardware stores as well as Home Depot, Lowes and paint stores. I use a small flat blade knife to apply, let dry, then lightly (very lightly) sand. Tada! Ready to paint.
Vinyl spackling and your finger for small holes in drywall. Wood filler and a putty knife for holes in woodwork.
White toothpaste works well.
Spackle. But here's how we did it when we were commercial painter's. Get a little amount of spackle about the size of a quarter in your hand. Roll it into a ball, then go around and squish into each hole while immediately wiping flat with your finger. This sounds so basic, but if you do it this way you won't need to sand anything. Your finger is a better gauge of a smooth surface than any tool. If the holes are bigger, then use a putty knife
Spackle. You can purchase it at a Home Depot or Lowe's, it comes in a bucket. You'll need a large putty knife, to smooth the surface, and then you sand it, to make it smooth. This is a messy job, cover your floors. Wipe it down with a damp rag. Then your ready to paint.
For small nail holes, I've used a softened aspirin tablet and chalkboard chalk...on hand, cheap and effective.
Hello there Andrea,
Use Spackle or Pollyfilla, or even NON gel Toothpaste if you run out. If it is for polished timber , then use a wood filler. Best wishes.