What mastic would be best?
I live in the desert and I have a block wall that I plan to decorate with a mosaic. I will use found stuff mostly; flat rocks, broken dishes and tiles, glass, buttons, etc. I need to know . . what would work best to attach the pieces to the block wall?
Related Discussions
How do I cleanly and precisely cut glass mosaic tiles?
Years ago, I tried using tile nippers on glass mosaic tiles and they just looked chewed up. Because they’re iridescent, a chewed up edge is going to really show. Th... See more
How can I make a mosaic on a door window w/o taking down the door?
I have a weird bathroom door that has a translucent window. It lets in a lot of light, and I thought it could be a good place to make a mosaic design using some of th... See more
How to make a DIY spray with ammonia, Listerine and epsom salt?
I need to know the measurements to use in my gallon sprayer for the Hostas bug spray. It is ammonia,Listerine,epsom salts and dish detergent. You say to use a hose ... See more
How do I clean the outside of an air conditioner from weeds?
How to make homemade ant poison?
I've been diving into the world of DIY solutions lately and stumbled upon homemade ant killers. I'm curious to know if any of you have tried making your own homemade ... See more
What could be causing a wet floor, if a plumber finds no leaks?
wet floor under sink dry iu and run water no leak? no smell all is clean. run water both tubs, garbage disposal, use sprayer everything underneath stays dry. Go away ... See more
Why is there a noise coming from my electrical outlet?
I have noticed a noise coming from one of my electrical outlets. It sounds like it is buzzing. What could be the reason for this?
https://www.doityourself.com/stry/4-tips-for-making-an-outdoor-mosaic
https://mosaicartsupply.com/outdoor-mosaics/
Hopefully one of these sites offers helpful advice. Your project sounds wonderful. I’d be tempted to ask for advice at a local garden center as well. Good luck and have fun.
I would go to Lowes or HD and explain what you are doing and get some answers.
Thank you for the good advice and the links! It seems that thin set motor is best for my application so I will go with that!