I would like to make this lighter maybe a white wash or a grey do I have to sand first or can I get some ideas.
How to make this lighter?
I would like to make this lighter maybe a white wash or a grey do I have to sand first or can I get some ideas.
Related Discussions
Should I paint or stain my oak kitchen cabinets?
I was wondering if you could help me with something -- I have an entirely oak kitchen. I know it's the rage now to paint or gel stain cabinets. I've been considering ... See more
How to paint a metal front door?
How do I paint my front door? It's metal.
How to paint grout?
How do I paint grout to change the color? The grout is in great shape, but the color - meh.
How to whitewash a brick fireplace?
What is the best method to whitewash bricks surrounding a fireplace?
DRESSER BEFORE AND AFTER: KEEP OR LOSE THE BACKBOARD?
Opinions Please! I got this very plain damaged dresser and was at a loss to what to do with it. I was inspired to glam it up. The top is stained and the finish is a b... See more
Shirley...I would clean well and sand some then prime and paint or purchase paint with primer included but I understand chalk paint does not require sanding or priming. Annie Sloan has a good chalk paint. Good luck!
Usually you have to sand anything you paint or varnish, so I think at least a light sanding would not hurt and probably would help a lot.
I own a modern Farmhouse Prime shop where I do make my own Furniture I refurbish some but I also make and tableside tables Buffet tables when Mel stuff like that what I would do is take mineral spirits in a big bottle of it it's like 10:50 at Walmart and Dallas staying off as much as you can and that's really going to lighten it up I don't know if you said how light you wanted but it will lighten to where you'll have a lighter stain where you don't have to stain it again and you can just polyurethane it wait 3 hours and it was a 220 wipe it off polyurethane and again wait 3 hours and it was another 220 you might end up having to do it four times to get the glass or sign that you want now if you're going to whitewash it and you wanted something like that I would still mineral spirits because it is cheaper I mean you don't have to have a stripper and then I would stand it with a 150 electrical sander and then I would just mix half a can of white and other half with water! Either way I hope you get the results that you want good luck