Best brand of electric powered nail gun for 1" thick wood projects?
Related Discussions
Why is it important to wear a mask when sanding?
You said you had a bad experience from sanding without a mask. Could you give me any info in that so I can encourage my brother to use one
Has anyone been able to locate "Wood U Bend Moulding" in the US?
There is a molding being sold in England, at least, called Wood U Bend. It can be heated to allow bending. I have not yet found a source from which to get it in the U... See more
What kind of saw did you use to cut the dresser in half?
How do I make a template to drill holes for cabinet hardware?
We had cabinets installed without hardware. Now we want handles and knobs but will need to put them on ourselves.
Caulk gun? what am I doing wrong?
I'm a senior, attempting to use caulk gun for the first time. Have my "cannister" of caulk, cut the top off ... nothing will happen. Takes all my strength to "pump"... See more
What are the best screws for use on corrugated metal?
I am putting up a backsplash using a sheet of new corrugated metal. What is the best type of screw to use for attaching this to the studs on the wall? I need somethin... See more
We have a Ryobi and we LOVE it. Here it is in action: https://www.frugalfamilytimes.com/2018/12/how-to-diy-wood-herringbone-pattern-ceiling.html
The problem with electric nailers is that they don’t have much power and so they can’t drive nails more than 1” which won’t suit your needs. There are battery powered nail guns that will shoot much longer nails but they are a lot more expensive. Your last option is to get an air nailer kit with a small air compressor an air gun and air hose. Many of these will drive up to a 2” nail (brad). Below is a link to one such kit on Amazon.
https://www.amazon.com/3PLUS-HCB050401-18-Gauge-Nailer-Compressor/dp/B075QB28TW/ref=sr_1_9?ie=UTF8&qid=1545057328&sr=8-9&keywords=Brad+nailer+kit
We have a Dewalt cordless battery operated nailer that is plenty powerful for our needs.
Nancy,
Think about your choice as a long term investment. Which will give you the most versatility for future projects beyond the one you are doing now? Buy the best you can afford. All the big box stores and Amazon sell multi-gun packages with compressors, which will be less than buying each piece separately. Whatever you choose, you will love having one. A regular DIYer can make do with one of the less expensive kits. All the major manufacturers make decent ones. I have the Porter Cable. I've had a few minor issues with it, but it does everything I need it to. Check out these:
https://www.amazon.com/s/ref=nb_sb_ss_i_3_8?url=search-alias%3Daps&field-keywords=nail+gun+and+compressor+kit&sprefix=nail+gun%2Caps%2C134&crid=4REEP50CL4GE
For cabinet making use 18g. I use 2.5" 16g for some types of interior trim and baseboard. If you are joining 1x boards, which are only 3/4" thick, then 1.5" straight brads would be the right length. Depending on the size and type of cabinet you are making, you may want to consider pocket screws and glue, especially if you are making face frames. Remember not to use brads to join mitered corners. It will be a weaker joint and more likely to split. I've never used a cordless nailer so I'll defer to others on the best choice. Hope this helps.