How ia the watering can/ with lights pouring out looking like water,
I've seen the project where they use a watering can and has lights pouring out looking like water. Need instructions
Related Discussions
How do I make shiny galvanized steel look dull like the watering can?
I am planning to use this galvanized bucket to store my hose & the watering can as a planter. Is there something I can do to the shiny upper part of the bucket to ma... See more
Painted wood: yay or nay?
Let's dive into the age-old debate: painting wood. Some homeowners swear by the transformative power of a fresh coat of paint on wood surfaces and furniture, while ot... See more
How to paint grout?
How do I paint grout to change the color? The grout is in great shape, but the color - meh.
Stray Cats Overtaking My Yard, Garden and Areas Around My House.
My neighbor has a million cats. This draws other cats to the area. My yard is full of cat poop, my gardens and plants are disgusting with the cat spray. What can I do... See more
How can I paint an indoor futon to be suitable for outdoor use?
need to know step by step
How to whitewash a brick fireplace?
What is the best method to whitewash bricks surrounding a fireplace?
Here's another one for you to look at: https://unskinnyboppy.com/2018/05/diy-fairy-lights-pouring-from-a-watering-can/
Hi Diane, here is a little video that may help
https://www.youtube.com/watch?v=xtO5Kl4b5-4
I actually make and sell these. I use solar fairy lights (the copper wire kind) and metal watering cans with a removable spray nozel. You have to make a few holes in the nozel bitter using a screw driver. I do the one in the middle and four or five evenly spaced a couple of rounds from the center. thread the entire length of lights through the spout starting inside the can. I measure out about 3-3 1/2 feet of lights and fold in half. I do this again for as many strands as I have enlarged holes. Then I fasten them together at the base, where the wire meets the plastic coated wire. Thread each looped section through the holes in the nozel, CAREFULLY, you don't want to break or cut a wire. Push all of the base into the nozel and screw back onto the spout. Hang by the handle. I hang mine on a shepherds hook and attach the solar pad to the hook with zip ties. Make sure the solar pad is on and let charge in the sun during the day. The results are quite pretty. Good luck.