Your posts?
Did you have a post of casting 3 hands that made a sculpture of the hands.
Related Discussions
Fence Posts - What are your thoughts on using gravel, concrete, dirt or some combo to put in fence posts?
We've just finished installing our first three panels of our first phase of our fence project. We decided to put a couple inches of gravel in followed by fast setting... See more
How to make homemade ant poison?
I've been diving into the world of DIY solutions lately and stumbled upon homemade ant killers. I'm curious to know if any of you have tried making your own homemade ... See more
What could be causing a wet floor, if a plumber finds no leaks?
wet floor under sink dry iu and run water no leak? no smell all is clean. run water both tubs, garbage disposal, use sprayer everything underneath stays dry. Go away ... See more
How to keep critters from getting under a mobile home?
An animal got through the skirting on my mobile home and died. My place had a terrible odor for two months since I couldn't locate the intruder. Is there an easy way ... See more
What can I put on my wooden pool deck to minimize the hot surface?
What can I put on my wooden pool deck to minimize the hot surface. I do not want to use regular carpet as it holds water and my deck is hugh.
How can I protect my door-casing from my power wheelchair?
My doorways are being ruined by my power wheelchair. It's more than just scratches in the paint. I have deep gouges in the wood. Before I try to get these filled and ... See more
Is this the project you are looking for?
https://www.hometalk.com/diy/outdoor/garden/our-concrete-hand-sculptures-30016067
Next time you are wanting to go back to any particular project, just type in your search words in the search box (beside the blue outline of a house) in the upper left hand corner of the page, where it says 'Find your next Project.'
Our Concrete Hand Sculptures
Hi Bonnie,
If you want a sculpture of 3 hands, you could used the instructions that Flipturn found but instead of drying them flat, you prop them into the position you want for the final product. Since they might be fragile and hard to pull off the gloves, I'd pay attention to the use of pipe cleaners and also let the concrete dry a little until it will hold it's shape. You also might have trouble removing all of the glove between the hands, but you could cut it off so that it doesn't show.
Another way is to create Alginate, which is what dentists use for molds. Here's a tutorial about how to make a hand mold that way.
https://www.madebybarb.com/2017/04/23/diy-life-cast-concrete-hands/
Here's another one showing a brand name product. Wishing you the best.
https://www.madebybarb.com/2017/04/23/diy-life-cast-concrete-hands/