How do I make this paint appear more even?
This door is painted with high gloss enamel but the colour isn’t uniform. Some parts don’t have the same sheen as the rest. It has had two coats. Why is this happening?
Related Discussions
Should I paint or stain my oak kitchen cabinets?
I was wondering if you could help me with something -- I have an entirely oak kitchen. I know it's the rage now to paint or gel stain cabinets. I've been considering ... See more
How to paint a metal front door?
How do I paint my front door? It's metal.
How to paint grout?
How do I paint grout to change the color? The grout is in great shape, but the color - meh.
How to whitewash a brick fireplace?
What is the best method to whitewash bricks surrounding a fireplace?
Hi Thea. It looks as if the duller areas dried too quickly, and/or the paint wasn't mixed uniformly. Give the entire door a quick rub down with 000 steel wool, wipe down with a damp cloth, then repaint. Choose an overcast day, and if the door opens into your home, you may want to turn off any heat or air that may dry it out unevenly. 😊
I would try priming it first, two solid coats. Sand it down first to make sure it is smooth and even. You may want to look at the paint you're using for it, too... is it old? Is it the right paint for this material?
Its all about keeping the paint stirred. With darker and glossier colors the paint needs to be consistently stirred to keep the pigment and the 'sheen' suspended in the paint
I agree with Karen and Dee. Thick and thin coats of paint and some areas dried quicker than others. Enamel does need to be stirred consistently to keep the paint solids suspended throughout the paint. Also priming first would have helped. Stopping mid stream will also cause shadows and blotches. Use a green kitchen scrubby to scuff the surface and remove the shine. Wipe down with a damp cloth. Use a foam roller to apply the paint. Go from bottom to top without stopping and keep a wet edge. Overlap the wet edge about 1/4". Then with a gentle touch go from top to bottom to even the finish out. It's called "laying off". Try to load the roller with the same amount of paint each time, but the "laying off" will help.