How can I make a vintage milk can water tight?
I am refinishing a vintage milk can that I would like to place in my backyard. I intend to use a good sealer on the can, but I want to make sure it is watertight so that water doesn't get inside the can. Anyone ever done this with success? I would love some ideas. Thank you!
Related Discussions
Blackout curtains behind vertical blinds
I have two 6' patio doors, and I want to add blackout curtains to keep the sun/cold out. What is the best way to hang them, and what can I use to push the curtains ba... See more
How to make a balloon garland?
Does anyone know how to make a balloon garland or a balloon arch?
How can I make my solar landscape lighting "theft proof"?
We purchased 3 pairs of solar LED landscape lights. They are simply spiked into the ground with the exception of one light that will be attached to the house using sc... See more
Can I use Sharpie markers on metal to make an outdoor sign?
How can I make a power tower in my back yard more appealing?
It is such an eye sore. Do you have any suggestions as to how to make it more appealing? Please keep in mind that the power company does not allow anything on the tow... See more
How can I make my address numbers reflect & show up better?
i have brass numbers on vinyl siding so i do not want to remove them and make additional holes putting new numbers back on or risk damaging my siding. is there any wa... See more
I don’t know how large the can is, or what part you want to seal, but you can buy clear silicone caulking.
You could always place a light source inside the can in a darkened room to be able to find any possible pinholes in the can or areas that need sealing
I would use a marine epoxy finish for the most water resistance.
I do NOT intend to open the can. I just wanted to make sure water wouldn't get inside if it was sitting out in the rain. Maybe with the lids on they are already watertight. These cans have the lids on straight and they appear to be tight so I might try the putty or caulking around the rim just to be on the safe side. Thank you!