Which hardware should I use to mount pre-drilled shelves?
what should I use to mount a shelve that already have constructed holes for mounting to a wall?
Related Discussions
Any ideas on how I could use leftover lattice? Inside decorating?
I have leftover lattice and would like to use it for some sort of indoor decorating project. Any ideas on a good use for it? It looks like this, just plain unfinished... See more
Planting under shady tree with roots
I have a jacaranda tree in my front yard with roots growing above ground. The tree has fern-like leaves that have prevented little growth of grass underneath. What ca... See more
Alternate way to install kitchen shelves that doesn't include drilling
I want to display my bowls, and other colorful accessories in my tiny tiny kitchen. There are no cabinets! Except those very high ones that i can’t reach! So all I ... See more
How do I remove a floating shelf?
Hello! We moved in to a new house and the previous owners had installed some floating shelves. How we we can’t work out how to take them off. We’ve tried pulling ... See more
Where to purchase insert tubes that go between plastic shelves?
Does anyone know where I can purchase these tubes? The manufacturer does not sell them separate from the shelves. I also cannot find PVC pipe at 1 1/8" to cut to fi... See more
What should the height/spacing be between 3 shelves in a living room?
Want to hang 3 shelves roughly 29 inches long/ 6 inches high. I’ve got 8 foot walls, cathedral ceiling. We up cycled some old barn wood and some metal troughs. Used... See more
Depends on your wall type, I would first look to see if I could screw in the mounting screws into studs. Studs are usually 16" on center. If you can't get it lined up to use the screws into the studs, then I would drill a slightly smaller hole into the wall board and hammer in a plastic anchor, then put in your screws leaving them out about 1/8" to slide the shelf onto the screw heads.... be sure to measure the distance between them correctly.
If they are mounted onto just the wall board, I wouldn't put a lot of weight on the shelf.
A picture would be helpful so we could provide more accurate answers.
Particle board or MDF shelves need judicious mounting to prevent them from breaking at the mounting points.
Please send a pic. Thanks.