How can I finish the roof under my deck (pic attached)?
My under deck roof is 12 by 30 feet long can I finish it with plywood and just paint it or is there a better product out there
Related Discussions
How can I make a "lean to" roof over my deck so rain doesn't blow in?
Keep rain from blowing in on lean to roofed covered deck?
How can I build a sturdy but inexpensive roof over my deck?
I was wondering if anyone had any ideas if you can't afford to build a roof over your deck what else would work? We live in missouri so we get all 4 seasons any help ... See more
What can I put on my cedar deck for a natural grey finish?
What to do with our livingroom ceiling?
We took the old popcorn ceiling off in our livingroom and thought we could just paint it. We fixed some hairline cracks where the joint in the sheetrock are, primed a... See more
Cheapest way to make a large retaining wall
I have almost 1/3 of an acre backyard that I will be re-establishing soon, and one of the projects will be a 2-3 ft tall retaining wall that will be approx. 25 feet ... See more
I am looking for someone to build me a pergola
I have a cement patio and want to have someone with experience build a pergola with a deck over the patio. I have a picture of just the one I would like that I found ... See more
Plywood would work great. For a more classic look you could go for "Plybead" which is plywood that looks like beadboard. You could consider one of the corrugated plastics they're making now, it would be lighter so WAY easier to handle and then you could have total piece of mind if it ever got wet. And there is also tongue and groove but that's really labor intensive.
I am wondering what kind of deck you have above your roof and how you keep rain from ruining what you already have constructed. Most deckboards have a space in between them so the water would seep down. Just curious! You state that this is an
"under the deck roof" so I am a bit confused! It looks like a roof that is going "over" a deck area. If THAT is the case then you could use plywood and paint it with an EXTERIOR paint.
I go with GrandmasHouseDIY. Plywood, beadboard plywood. Tongue and groove beadboard. I wouldn't go with corrugated plastic panels. Would look tacky with the beautiful construction you have.
I think paint would look great.