How do I make a tufted headboard for a full-sized bed?
It was made from poster board covered in neutral fabric and tufted with buttons
Related Discussions
How to replace a toilet seat?
I need advice on how to replace a toilet seat, please. What do I need to know when looking for a new one?
How can I turn a headboard into a freestanding headboard?
Have bed frame that had head and foot board with with wood side rails. No longer using foot board. How can I make the headboard freestanding. I do not want it attache... See more
Can I make a King Size headboard fit a CA king bed?
A few years ago we bought our son a CA king bed and his original king size headboard has never fit. It's too wide. It has matching side tables so we would like to ma... See more
How can I mount a metal headboard on the wall behind the bed?
I have a metal headboard i want to mount on the wall behind my bed
How do I build an inexpensive corner-fitting headboard?
I like my bed to tuck in to room 's corner. Approx. 48 to 52 inches high and just deep enough for lamp, a few googaws and my CPAP machine. Oh, and inexpensive; it wou... See more
How do I place a queen size sleigh bed in a small room?
Bed Risers & Headboard
I put risers under my bed. Now the headboard is too short and doesn't look good at all. What can I do? Thank you.
Was it this one: https://www.hometalk.com/diy/bedroom/furniture/tufted-headboard-slip-cover-37575227?expand_all_questions=1?
Tufted Headboard Slip Cover
https://www.hometalk.com/diy/bedroom/furniture/tufted-headboard-slip-cover-37575227
https://www.hometalk.com/diy/build/furniture/build-a-diy-headboard-and-create-the-bedroom-sanctuary-you-deserve-41223326
Tufted Headboard Slip Cover
Build a DIY Headboard and Create the Bedroom Sanctuary You Deserve
Hello. This Headboard upholstery Links might be helpful.
https://www.hometalk.com/diy/build/furniture/s-tufted-headboard-ideas-41921616
additionally
https://www.hometalk.com/diy/build/furniture/diy-upholstered-bed-3587377?
DIY Upholstered Bed
I tufted my headboard, but used plywood. I can't imagine poster board would hold up. I pre-drilled the holes in the plywood, and then used a 6" needle and carpet thread to add the buttons..... https://www.youtube.com/watch?v=lsk_MJZXMC0
here is how I did it - https://www.charlestoncrafted.com/turn-a-wrought-iron-headboard-into-an-upholstered-headboard/
https://www.youtube.com/watch?v=msKtP4hOPMw