Examples
How do I make a Granite Live Edge?
I’ve cut granite before, as well as a lot of stained glass, but this time I want a Live Edge granite top. I own a 4” angle grinder with diamond blades, a full set of masonry drill bits and a Star chisel. Because granite is not a homogeneous crystallized structure, I am not going to just take my star chisel & start tapping on it.
I’m think masonry drill bits holes & play “connect the dots”, although I’d have to get some special belts for my belt sander, as my D.A. would take a month to soften the effect.
TIA.
Related Discussions
Why is it important to wear a mask when sanding?
You said you had a bad experience from sanding without a mask. Could you give me any info in that so I can encourage my brother to use one
Has anyone been able to locate "Wood U Bend Moulding" in the US?
There is a molding being sold in England, at least, called Wood U Bend. It can be heated to allow bending. I have not yet found a source from which to get it in the U... See more
What kind of saw did you use to cut the dresser in half?
How do I make a template to drill holes for cabinet hardware?
We had cabinets installed without hardware. Now we want handles and knobs but will need to put them on ourselves.
Caulk gun? what am I doing wrong?
I'm a senior, attempting to use caulk gun for the first time. Have my "cannister" of caulk, cut the top off ... nothing will happen. Takes all my strength to "pump"... See more
What are the best screws for use on corrugated metal?
I am putting up a backsplash using a sheet of new corrugated metal. What is the best type of screw to use for attaching this to the studs on the wall? I need somethin... See more
I've never done it but I've seen it made with a chisel and tapped away. It appears to be a process that requires a lot of skill and practice. Once you get it done, you will have an amazing project to post.
Drilling holes will leave half of the drilled areas visible when you" connect" the dots. Use your grinder and score a line where you want the live edge. The use a brick or cold chisel and gently tap along the line with several passes. You will hear the change in sound when the edge is about to break off. You can use the grinder or chisel to clean any sharp edges. If you want a cleaner edge...use the grinder and roughen the edge. Then use a cold chisel and randomly chip the sharp corners. Some sandpaper just to dull them.
no idea I just want to say good for you thats gonna be cool when you are done!
sweet i want know how to this nice