Refinishing hardwood floors: DIY or hire a pro?
-
Harold M on Aug 15, 2011Hire a pro. You can destroy a wood floor when sanding with a drum sander. Plus its back breaking work (My opinion anyway)Helpful Reply
-
-
Lindsay on Aug 15, 2011Maybe you can see if someone will work with you, and start you off and teach you and then you take over?Helpful Reply
-
-
Peace Painting Co., Inc. on Aug 15, 2011Harold is right.Helpful Reply
-
-
Nichter's Home Services Corp on Aug 15, 2011This is NOT a DIY job for most people. Pros have tons of stories to tell abut ruined flooring by DIYs. However, this depends on what condition the floor is in and how much work is required. Sometimes a light screening will do, and larger orbital machines can be rented that can be handled by a DIY. Got pictures?Helpful Reply
-
-
Connie E on Aug 15, 2011Pro Pro Pro.Helpful Reply
-
-
3po3 on Aug 15, 2011Pretty sure my neighbors on both sides who did this DIY would probably go pro if they had to do it all over again.Helpful Reply
-
-
Pamala S on Aug 16, 2011Hard work, so we went with a pro and never regretted it.Helpful Reply
-
-
KMS Woodworks on Aug 17, 2011Even with "pros" you need to select wisely. I recently performed some cabinet repairs and some minor plumbing and electric work for a client. She was having floor work and painting work done. The "painter" said that he also did floors, so she went with him...this is before she found out I do floors. ( My flooring history goes back to 1983, so When I saw the work the "painter" did I was stunned by the poor quality). Some example of his "pro" work....these are AFTER photos not before'sHelpful Reply
-
-
Sarah L on Aug 17, 2011Thanks for all the great advice.Helpful Reply
-
-
Nichter's Home Services Corp on Aug 19, 2011Eghaads KMS!!! Looks like he didn't even try to make it look nice. Also like he used hand held orbital for all of it and did not have the right equipmentHelpful Reply
-
-
KMS Woodworks on Aug 19, 2011He did have a floor "pad" sander....the vibratory type. His first work was wimpy and I insisted to the home owner that he should do a more thorough sanding the first pass in the living room did nothing to clean up the soiling in the heavy traffic areas...even afterward they were highly visibleHelpful Reply
-
-
TonyaM Williams on Aug 19, 2011Sarah, I would hire a pro on this one. The dust alone is going to make you feel as if you are in a sandstorm in the Sahara. There are some projects that are DIY and others that are LAPDI--"Let A Professional Do It" this one falls in the latter category. Let us see your before and after pics. TMWHelpful Reply
-
Related Discussions
Can I use a small power sander to remove paint from my porch?
Have painted it with outdoor Behr deck paint but it has flaked up. I got a lot of it up but need to get the rest off before repainting. Getting too old to get down ... See more
How do I hang curtain rods if I can't find wall studs?
How can I darken the color of painted furniture using varnish?
Hi, I just paint my outdoor dining set, but the color is a little lighter than what I want. I am planning to apply varnish on them and I was thinking to take advantag... See more
Can a water based varnish be used on chalk paint?
Is it possible to use a water based clear varnish instead of the finishing wax on chalk painted furniture? I love the look of distressed chalk paint but I'd like a sa... See more
I'm trying to hang a curtain rod over a sliding glass door, but keep hitting something that I can't drill through.
The house is built of cement blocks, but there is drywall on the walls. I had another house that was the same type, but never had a problem with hanging curtain rods.... See more
Can I hang a dresser mirror on my bedroom wall?
How to use a mirror from a old dresser can it be hung on a bedroom wall?