Any advice on polishing old marble?
-
KMS Woodworks on Dec 18, 2012I have a full set of wet only and wet or dry diamond polishing pads. These are about 4" in dia and have a velcro back they attach to a "driver" that screws onto my right angle grinder. The grinder is a bosch variable speed. These must be used with a variable speed tool. Many commercial polishing folk will use the wet pads with a pneumatic die grinder type rig...these run cool and can tolerate wet work. I use mine mostly for edge polishing granite and marble tile and have done a bit of "flat" work with them. The grit start around 50 and go to 3000 using 8 to 12 pads. http://www.ebay.com/itm/Diamond-Polishing-Pads-4-inch-Wet-Dry-11-Pce-Set-Granite-Marble-Concrete-Stone-/300702227609?_trksid=p3284.m263&_trkparms=algo%3DSIC%26its%3DI%26itu%3DUCI%252BIA%252BUA%252BFICS%252BUFI%26otn%3D21%26pmod%3D270642165535%26ps%3D54 It is a bit time consuming but works great.Helpful Reply
-
Related Discussions
Any advice on removing rust stains from a marble sink top?
Thanks!
Siding and insulation 100+ year old house - any advice?
I have an old house that has double wood walls. Wood on the inside, under the sheetrock, then 2x4 support studs and horizontal fire breaks, then wood siding on the ou... See more
How can I get evergreen climbing vines that don't attract bees?
Need privacy screen I can train on trellises for my patio. There's lattice there, but not enough to block out neighboring home. This is a mobile home. Would love flow... See more
I am gluing some colored glass gems onto a glass window..
I am using E6000 to attach the glass gems to an old window. I want to make sure that everything will stay attached. I plan on spraying clear Krylon onto the whole gla... See more
How do I get the black marks off my composite deck?
As we all know New England is getting hammered with snow this year! And I had so much snow on the deck that I had to use the snowblower to get it off. I'm anticipatin... See more
How do I remove a rust stain from a wooden deck?
How do I remove a large, deep rust stain from a metal pan off my stained wooden deck?
How do I get grease stains off of composite decking material?
I have a bbq rug under the grill but I ended up getting some grease on the material anyway. Any idea?