I am using wood filler to repair the gnawed edges of my window sill .
-
KMS Woodworks on Oct 16, 2011you can often wet the putty knife to get a smoother finish....apply the filler so it is just above the level of the existing wood..after the filler has fully dried / cured it can be sanded flush...depending on how deep the damage is you may need to apply a couple of coats...some filler will shrink and crack when applied too thick.Helpful Reply
-
-
Delores G on Oct 16, 2011Great response---dampen the putty knife. I should have thought about that! Like icing a cake!Helpful Reply
-
-
Ricardo B on Oct 16, 2011I like that icing analogy... Remember, crumb layer, working layer, then finishing layer. Sand down gradually...Helpful Reply
-
-
Inspection Connection, LLC on Oct 16, 2011Delores, Apply wood filler to fill the holes, let it harden and sand. You might have to do it twice to get a smooth service. After sanding clean and paint.Helpful Reply
-
-
Wood restoration co . on Oct 16, 2011a whole nuther option is quik-wood .. a moldable epoxy putty .. dries hard as nails can be shaped and smoothed to where virtually no sanding is necessary . i use on fine furniture and woodwork all the time .Helpful Reply
-
Related Discussions
How to remove popcorn ceiling with asbestos?
I want to remove my popcorn ceiling, but it has asbestos in it. How do I go about this safely?
Painted wood: yay or nay?
Let's dive into the age-old debate: painting wood. Some homeowners swear by the transformative power of a fresh coat of paint on wood surfaces and furniture, while ot... See more
How to paint grout?
How do I paint grout to change the color? The grout is in great shape, but the color - meh.
Stray Cats Overtaking My Yard, Garden and Areas Around My House.
My neighbor has a million cats. This draws other cats to the area. My yard is full of cat poop, my gardens and plants are disgusting with the cat spray. What can I do... See more
How can I paint an indoor futon to be suitable for outdoor use?
need to know step by step
How to whitewash a brick fireplace?
What is the best method to whitewash bricks surrounding a fireplace?