Looking for a simple fix for front door issue
-
Janet Pizaro on Aug 18, 2015Do you like the color of the door?I would go to a professional at the paint store. It is hard to tell the material of the door. I would think you need to find that out first before anyone will be able to answer.Helpful Reply
-
-
Mark on Aug 18, 2015Use an automotive paint or rustoleum, sand loose stuff off, prime, and paint. Also- use a lite color - sun has less of an effect.Helpful Reply
-
-
Swan Road Designs on Aug 18, 2015Talk to someone who is well-versed in paints/painting and who can assist you with choosing a paint or finish that is UV resistant. That is your main culprit...sun damage. It can ruin nearly any surface unless the proper product is used.Helpful Reply
-
-
EdiLeck on Aug 18, 2015Have you tried an automotive finish restorer? I know Meguiar's, Mother's and Turtle Wax all make finish restorers that work well when mixed with a bit of elbow grease! Any of these products should be available at just about any auto parts store.Helpful Reply
-
-
April Weber on Aug 18, 2015If it's oxidized, remove the oxidation, then repaint with a good steel door refinish. If you paint over the oxidation, depending on the weather in your area, the paint will crack or peel, make sure your remove your oxidation first.Helpful Reply
-
-
Janet Pizaro on Aug 18, 2015April obviously thats a no brainer. Its still not clear if the door is totally steal.So matter what people comment that is the issue.Helpful Reply
-
-
Janet Pizaro on Aug 18, 2015But again its still not clear. Thats the point.,No one can help if the materials are not disclosed.Helpful Reply
-
-
Betty Miller on Aug 18, 2015If you purchased this door go back to where you bought it to get information. Research the reviews for the door find out what that company says about it. It may be the door wasn't sealed properly to start with. Company may have a fix. Warranty may not be good any longer but information maybe available.Helpful Reply
-
-
Z on Aug 18, 2015@Eloise, if you know the manufacturer, I would recommend contacting them, as they should have answers for you. Another thought, it looks as thought it could be fingerprints. Have you tried washing it with blue Dawn dish soap and water and a soft cloth?Helpful Reply
-
-
Gilly on Aug 19, 2015You can't use wax outside by the way, it melts in the sun. Wax is for interior use only so that is not an option. I agree with Becky you should contact the manufacturer, they may have a solution for you.Helpful Reply
-
-
Danielle on Aug 19, 2015If you don't have any luck contacting the manufacturer try cleaning the spots off with chalk. Just get a piece of plain white chalk and a microfiber cloth. Blunt the chalk off on the sidewalk or whatever rough surface you have so you don't scratch your paint. Color over the stains with the chalk, let it sit 5 minutes, brush the excess chalk off, then use a damp microfiber cloth to scrub off the chalk that has bonded to the oily stains. If that takes the stains off then go to your local auto parts store and grab a can of automotive clear coat spray paint to seal the door. It's designed to go over painted metal, it's hard as nails since its for automotive use, non yellowing, and should only cost you $10 - $15.Helpful Reply
-
-
LD on Aug 19, 2015Eloise, it looks as though the issue is with the finish applied to the door. If you purchased this door and it is still under warranty, I would recommend that you contact them, now if the door is no longer under warranty, then your best option is to paint the door, but make sure to properly prepare the door, seal with a stain blocker/primer and then paint with top quality paint (I personally use Sherwin Williams products and they have the capability to create the paint from a picture).Helpful Reply
-
-
Peggy Henderson on Aug 19, 2015Paint it. Even though it is time consuming, you will be rewarded with the results!Helpful Reply
-
-
Rus1058682 on Aug 19, 2015Use McGuire's on it to remove the oxidation, and buff it out with soft cloth. Then reapply and buff a second time. I would do this atleast twice a year, for best results.Helpful Reply
-
-
Rose on Aug 19, 2015Ck out "have a worn out painted garage door"Helpful Reply
- See 1 previous
-
-
Terri S on Aug 19, 2015I took mine to a detail auto body shop and had them repaint it and bake it, and it's fantastic now.Helpful Reply
-
-
Jennifer Lynn on Aug 19, 2015Sand the door down and apply an outdoor Benjamin Moore paint, it's the most versatile outdoor paint you can buy! Or get a new door and do something creative with this one like an indoor hall tree!Helpful Reply
-
-
Karrah @ Mrs Do It Herself on Aug 19, 2015Modern Masters has a new paint just for Front Doors... it's called Front Door Paint.. imagine that. Anyway, it only takes 2 coats, never fades.. .and comes in a variety of colors. I just painted mine in a deep red called Passionate. It's awesome.Helpful Reply
- See 1 previous
-
-
153091 on Aug 19, 2015HINT: I always use a sponge roller when painting doors..especially metal ones. The results are very professional looking.Helpful Reply
-
-
Donna Soares Burt on Aug 19, 2015I had ours painted with left over free standing wood stove paint and so far it has held up quite nice. It gets east sun so doesn't weather too bad but is holding up better than the previous paint which was just regular oil based paint. On one of our other houses we used a body shop to paint them and it was the best idea.Helpful Reply
-
-
Sharon de Vries on Aug 20, 2015we have the same issue i had the door originally painted at a car paint shop but after ten yrs in sun its horrible but i dont seem to be able to find paint specific for my door but behr paint exterior might be the solution or even cut all the front panels and put one glass panel in the front something that speaks of the people in the house and choose a color you like and fly at it…easier to paint before glass goes it…what you think….Helpful Reply
-
-
JoAnna Cooper on Aug 20, 2015Get rid of that door!!!! That's my first thought when I see doors with glass panes or panels within inches of the entry locks. One hard hit, glass broken and entry into your home. I would replace with steel entry doors with extra long dead bolt. Sorry I'm not for spending money, but security of your home is of the utmost importance in my book. You can always bore through and put an entry keyhole lookout through the new door, that way you don't open your door without looking first.Helpful Reply
- See 2 previous
-
-
Sharron W on Aug 20, 2015I'd try McGuire's (I think that is how its spelled) , car wax and buff it with a car buffer....I used it on my Pink Cadillac...and it came out a beautiful red....lol which is exactly what it was supposed to be....the previous owner did not do a good job of keeping up his vintage car!Helpful Reply
-
-
Ken on Aug 22, 2015Go to the automotive section of Walmart and get some Dupont car finish Rubbing Compound and then rub it on with a sponge according to directions, then buff it off with a cotton cloth and then apply a good brand of Car wax.Helpful Reply
-
Related Discussions
How to get rid of mice?
We seem to have some unwelcome Mickeys and Minnies in our house. What is the best way to get rid of them?
How to remove popcorn ceiling with asbestos?
I want to remove my popcorn ceiling, but it has asbestos in it. How do I go about this safely?
How to caulk baseboard gaps?
How do I fill gaps at baseboard, should I caulk? If so, does anyone know how to caulk baseboards?
How to fix squeaky hardwood floors?
How do I fix squeaky hardwood floors?
Brr! Drafty windows- how to cut the draft?
I have 3 sets of windows configured like this...very drafty, How to you winterize them? There is nothing in the corner to stick tape to. Thank you
What would you do with this door?
Please help! I purchased a new (to me) home which seems to still have the original door from when it was built around 1950. It is boring...and is painted a boring whi... See more