by Ale32219411
The super glass that I applied in my shower bench only half dried!
+20
I applied super glass on my shower bench 4 days ago, half of the bench still sticky and half dried. Should i apply another coat of super glass to it, or should i wait more time for it to dry?
11 answers
-
![Elizabeth Michels Pinizzotto]()
Elizabeth Michels Pinizzotto
on Dec 26, 2017
I cannot find any information on "super glass" , perhaps you need to contact the manufacturer.- See 2 previous
-
![Barbara]()
Barbara
on Dec 26, 2017
What is "super glass"? -
![A]()
A
on Dec 27, 2017
Are you referring to Super Glaze by Rust-Oleum?https://www.rustoleum.com/~/media/DigitalEncyclopedia/Documents/RustoleumUSA/instruction-sheets/SuperGlaze_Instructions.ashx- See 2 previous
-
![Susan]()
Susan
on Dec 27, 2017
You really need to call the manufacturer. Look for an 800 number on the can. It shouldn't behave the way you describe. -
![Ale32219411]()
Ale32219411
on Dec 27, 2017
Sorry, super glaze by Rust-Oleum -
![Wendy Thurber-Koch]()
Wendy Thurber-Koch
on Dec 27, 2017
If you are referring to a tile and grout sealant, I would suggest adding another coat and wiping away quickly. If it is allowed to sit too long between wiping the excess of it will do this. The only way to repair it is to add another coat to deactivate the sealant. -
![Linda Sikut]()
Linda Sikut
on Dec 27, 2017
I had the same problem with Super Glaze. The first person I talked to at Rustoleum said to wipe the uncured part with acetone (nail polish remover but just the plain acetone. You can find it anywhere nail polish is sold. It's used to remove fake nails. Unfortunately, that didn't work for me but it might work for you. :) Wishing you the best & Happy New Year!- See 1 previous
-
![William]()
William
on Dec 27, 2017
I read that Clorox Wipes takes the stickiness away. Also applying to tile it may take two to three applications to get a smooth finish. The uneven surface and grout may cause bubbles to form. -
![Barbara]()
Barbara
on Dec 27, 2017
Thank you. -
![Starr Wilson]()
Starr Wilson
on Dec 27, 2017
Is there a date on the can? It could be old. Try using a heater in there and see if that helps. Good luck. -
![Olgabolga]()
Olgabolga
on Dec 28, 2017
I saw a guy using a torch help dry resin on wood. I 'd try heat gun. My husband always has the problem with resin stickiness for weeks. I think he pours too much at once, that's why. But I'm just a woman, what do I know... ;)
Elizabeth Michels Pinizzotto
on Dec 26, 2017
A
on Dec 27, 2017
Susan
on Dec 27, 2017
Ale32219411
on Dec 27, 2017
Wendy Thurber-Koch
on Dec 27, 2017
Linda Sikut
on Dec 27, 2017
William
on Dec 27, 2017
Sign Up to Answer
