Pressure wash first. That will remove loose paint. If paint remains, you will probably want to scrape. Although you can use a paint solvent, I would recommend scraping.
Karen, just a little warm soapy water and a green nylon scrubby should take it off. If you aren't in a hurry, the aluminum will make the latex peel off because latex and aluminum are incompatible.
Start with hot soapy water & try to scrub it off with the scrubby side of a 2 in 1 style sponge. You might have to use a razor blade to remove any paint stuck in the tight spots.
Nothing seems to help bring the dried tape residue off. I put plastic on windows, since windows seem to leak in cold air. They are good windows,but not installed pro...
See more
Pressure wash first. That will remove loose paint. If paint remains, you will probably want to scrape. Although you can use a paint solvent, I would recommend scraping.
Hi. I had great success with a wire brush. Then I used a paint solvent to remove the rest. Good luck.
Karen, just a little warm soapy water and a green nylon scrubby should take it off. If you aren't in a hurry, the aluminum will make the latex peel off because latex and aluminum are incompatible.
Start with hot soapy water & try to scrub it off with the scrubby side of a 2 in 1 style sponge. You might have to use a razor blade to remove any paint stuck in the tight spots.
Hello,
Try using a scalpel if small otherwise maybe gel paint remover?
Hello, here is a link with the best way to get rid of this paint,
https://homesteady.com/13402080/how-to-remove-paint-from-aluminium-window-frames