Get a Miter Box from Home Depot or Lowe's...not expensive and you want mess up if you follow instructions. it's the best way to go don't let them sell you the electric one. My dad used one all my life and we remodel the room in our house and I helped cut the corners with the miter box. Good luck
I love the wood and plastic ones that are available now because my sawing arm is not as strong as it use to be. The corners go in or out, at several possible angles, and they are already painted white. ☺️
if your not wanting to miter your crown molding in your corners and just want a block to butt your molding against. You can get 2x2 or 4x4 and cut the blocks to the length you need or want. sand the endgrain and you can route a decorative edge if you choose to. i’m Assuming your using painted Crown molding, so paint the blocks to match. If your staining the molding, you may need to get vaneer of the same spices of wood to glue to your blocks then stain
I visited a home with beautiful crown moulding and archways. The owner (who has passed away) made them himself from large pieces of styrofoam. I would love an arch ov...
See more
I am running chair rail around a bedroom. The marble sill is 40" from the floor the window is 39" high. Putting printable wallpaper on the bottom. Painting the botto...
See more
I am very new to working with tools and am wondering what the best type of nail gun I should buy to work with pallets. I am interested in redoing a wall with pallets ...
See more
I have a few amazing pieces that are old and the paint is chipping. I love them just the way they are but hate the flakes that constantly come off! What to do so it'...
See more
I recently visited a friend who had the most brilliant idea for a dish rack: an over-the-sink design that maximized space and efficiency (see picture below). It got m...
See more
Get a Miter Box from Home Depot or Lowe's...not expensive and you want mess up if you follow instructions. it's the best way to go don't let them sell you the electric one. My dad used one all my life and we remodel the room in our house and I helped cut the corners with the miter box. Good luck
I love the wood and plastic ones that are available now because my sawing arm is not as strong as it use to be. The corners go in or out, at several possible angles, and they are already painted white. ☺️
if your not wanting to miter your crown molding in your corners and just want a block to butt your molding against. You can get 2x2 or 4x4 and cut the blocks to the length you need or want. sand the endgrain and you can route a decorative edge if you choose to. i’m Assuming your using painted Crown molding, so paint the blocks to match. If your staining the molding, you may need to get vaneer of the same spices of wood to glue to your blocks then stain
You got this! https://www.youtube.com/watch?v=20F4I7iHzpA